HP Affichage pour enseigne lumineuse interactive HP LD4245tm 4192 pouces - Manuel (Page 107)

Data4
00 to 17: 00 to 23 Hours
Data5
00 to 3B: 00 to 59 Minutes
* When you read or delete the current on time list, all of [Data2] [Data3] [Data4][Data5] have to be ffh.
(Example 1: fd 01 f1 ff ff ff ff - when you read the 1st index On Time list)
(Example 2: fd 01 e1 ff ff ff ff - when you delete the 1st index On Time list)
(Example 3: fd 01 f1 3f 01 02 03 - when you write 1st index of On Time Data, "Monday to Sunday
every week, 02:03"
* When reading data, ffh is inputted for [Data2][Data3][Data4][Data5]. In other cases, all are treated
as NG.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4][Data5] [x]
21. Sleep Time (Command: f f)
To set the Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00: Off (Sleep Timer off)
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
22. Power On Delay (Command: f h)
To set the schedule delay when the power is turned on. (Unit: Second)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data
00 to 64: min. 0 to max. 100 (sec.)
Transmission / Receiving protocol 97