LG 24LN4510 - Manuel (Page 24)

ENGLISH
24 MAKING CONNECTIONS
Connecting a PC
HDMI Connection, DVI to HDMI Connection or RGB Connection
Choose method A, B or C to make connection.
Method A: HDMI Connection
If you want to use HDMI-PC mode,
you must set the input label to PC or DVI mode.
HDMI IN
HDMI
PC
It is recommended to use an HDMI connection for the best image quality.
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is
present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness
and contrast on the PICTURE menu until the picture is clear.
The synchronization input form for Horizontal and Vertical frequencies is separate.
Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen
properly.
If you want to use HDMI-PC mode, you must set the input label to PC mode.
The OSD (On Screen Display) is displayed on the screen as shown below.
- When turning the product on in HDMI input.
- When switching to HDMI input.
Is the input connected to your PC?
Do not show message again.
Yes No
If you select “Yes” the size and image quality are optimised for your PC.
If you select “No” the size and image quality are optimised for the AV device (DVD player, set-top box, gaming
device).
If you select “Do not show message again” this message does not appear until the TV is reset. You can change the
set value in SETTINGS
INPUT Input Label.
NOTE
NOTE
(Not Provided)