Off/cancel, Clock, Tones – Whirlpool YIES366RS1 Manuel d'utilisation

Page 10: Fahrenheit and celsius, Timer, Control lock, Oven temperature control

Advertising
background image

10

Off/Cancel

The Off/Cancel pad stops any function except the Clock, Timer
and Control Lock.

The cooling fan may continue to operate after an oven function
has been canceled, depending on oven temperature.

Clock

This is a 12-hour clock and does not show a.m. or p.m.

To Set:

Before setting, make sure the oven and Timer are off.

1. Press CLOCK.

2. Press the TEMP/TIME “up” or “down” arrow pad to set the

time of day.

Press START/ENTER or CLOCK.

Tones

Tones are audible signals, indicating the following:

One tone

Valid pad press

Oven is preheated (long tone)

Function has been entered

Reminder, repeating each minute after the end-of-cycle tones

Three tones

Invalid pad press

Four tones

End of cycle

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to
Celsius.

To Change: Press and hold CUSTOM BROIL for 5 seconds. A
tone will sound, and “°C” will appear on the display. Repeat to
change back to Fahrenheit. To exit mode, press CANCEL.

Timer

The Timer can be set in hours or minutes up to 12 hours and
59 minutes and counts down the set time.

NOTE: The Timer does not start or stop the oven.

To Set:

1. Press TIMER CANCEL*.

The timer oven indicator light will light up. If no action is taken
after 1 minute, the display will return to the time of day mode.

2. Press the TEMP/TIME “up” or “down” arrow pad to set the

length of time.

3. Press START/ENTER.

When the set time ends, four 1-second tones will sound.

4. Press TIMER CANCEL* anytime to cancel the timer and/or

stop reminder tones. To cancel the timer during the
countdown, press TIMER CANCEL* twice.

The time can be reset during the countdown by repeating the
above steps. To display the time of day when the timer is
counting down, press CLOCK.

*Timer start/Timer cancel keypad.

Control Lock

The Control Lock shuts down the control panel pads to avoid
unintended use of the oven.

When the control is locked, only the Clock and Timer pads will
function.

To Lock/Unlock Control: Before locking, make sure the oven
and Timer are off. Touch and hold START/ENTER for 5 seconds.
A single tone will sound, and “LOC” and “LOCK’D” (on some
models) will appear on the display. “LOC” will also appear
whenever any command pad is pressed while the control is
locked.

Repeat to unlock. “LOC” and “LOCK’D” (on some models) will
disappear from the display.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door and element or
burner cycling may give incorrect readings.

The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted.

A minus sign means the oven will be cooler by the displayed
amount. The absence of a sign means the oven will be warmer by
the displayed amount. Use the following chart as a guide.

To Adjust Oven Temperature Calibration:

1. Press and hold BAKE for 5 seconds until the oven display

shows the current calibration, for example “00.”

2. Press the TEMP/TIME “up” or “down” arrow pad to increase

or to decrease the temperature in 10°F amounts. The
adjustment can be set between 30°F and -30°F.

NOTE: All temperature adjustments will be displayed in
Fahrenheit.

3. Press START/ENTER.

ADJUSTMENT °F

COOKS FOOD

10°F

...a little more

20°F

...moderately more

30°F

...much more

-10°F

...a little less

-20°F

...moderately less

-30°F

...much less

Advertising