Ceramic glass, Dual size element, On some models) – Whirlpool W10162166A Manuel d'utilisation

Page 6

Advertising
background image

6

Ceramic Glass

(on some models)

The surface cooking area will glow red when an element is on. It
will cycle on and off, at all settings, to maintain the selected heat
level.

It is normal for the surface of white ceramic glass to appear to
change color when surface cooking areas are hot. As the glass
cools, it will return to its original color.

Wiping off the cooktop before and after each use will help keep it
free from stains and provide the most even heating. On cooktops
with white ceramic glass, soils and stains may be more visible,
and may require more cleaning and care. For more information,
see “General Cleaning” section.

Do not store jars or cans above the cooktop. Dropping a
heavy or hard object onto the cooktop could crack the
cooktop.

Do not leave a hot lid on the cooktop. As the cooktop cools,
air can become trapped between the lid and the cooktop,
and the ceramic glass could break when the lid is removed.

For foods containing sugar in any form, clean up all spills and
soils as soon as possible. Allow the cooktop to cool down
slightly. Then, while wearing oven mitts, remove the spills
while the surface is still warm. If sugary spills are allowed to
cool down, they can adhere to the cooktop and can cause
pitting and permanent marks.

Do not slide cookware or bakeware across the cooktop.
Aluminum or copper bottoms and rough finishes on
cookware or bakeware could leave scratches or marks on the
cooktop.

Do not cook popcorn in prepackaged aluminum containers
on the cooktop. They could leave aluminum marks that
cannot be removed completely.

Do not allow objects that could melt, such as plastic or
aluminum foil, to touch any part of the entire cooktop.

Do not use the cooktop as a cutting board.

Use cookware about the same size as the surface cooking
area. Cookware should not extend more than ½" (1.3 cm)
outside the area.

Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed or
dented bottoms could cause uneven heating and poor
cooking results.

Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler,
no space or light should be visible between it and the
cookware.

Cookware designed with slightly indented bottoms or small
expansion channels can be used.

Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits
when heated.

Do not cook foods directly on the cooktop.

Hot Surface Indicator Light (under ceramic glass)

The hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area(s) is turned off.

Dual Size Element

(on some models)

The dual size elements offer flexibility to cook using different
sizes of cookware. The single element can be used in the same
way as a regular element. The dual element combines both the
inner and outer elements and is recommended for larger
cookware.

To Use SINGLE:

1. Push in and turn the control knob counterclockwise from the

OFF position to anywhere between HI and LO.

2. Push in and turn knob to OFF when finished.

To Use DUAL:

1. Push in and turn the control knob clockwise from the OFF

position to anywhere between HI and LO.

2. Push in and turn knob to OFF when finished.

A. Surface cooking area
B. Cookware/canner

C. ½" (1.3 cm) Maximum overhang

A

B

C

A. Single element (6" [15.24 cm])
B. Dual element (10" [25.4 cm])

A. Single
B. Dual

A

B

B

A

Advertising