Modifiers, Options – Whirlpool Cabrio W10151493B Manuel d'utilisation

Page 20

Advertising
background image

20

Modifiers

Automatic Cycle Modifiers

Use the Dryness Modifier to select dryness levels for the Auto Dry

Cycles. Press DRYNESS until the desired Dryness setting

illuminates.
The preset dryness setting is Normal when an Automatic Cycle is

selected. You can select a different dryness level, depending on

your load, by pressing Dryness and choosing More, Normal, Less,

or Damp. Selecting More, Normal, Less, or Damp automatically

adjusts the dryness level at which the dryer will shut off. Once a

dryness level is set, it cannot be changed without stopping the

cycle.

NOTE: Dryness Level selections cannot be used with the Timed

Cycles.

Timed Cycle Modifiers

Use the Temperature Modifier to select temperatures for the

Timed Cycles. Press TEMP until the desired temperature setting

illuminates.

NOTE: Temperature modifiers cannot be used with the Auto Dry

Cycles.

Air Only

Use the Air Only Modifier for items that require drying without

heat such as rubber, plastic, and heat-sensitive fabrics. This table

shows examples of items that can be dried using Air Only.

*Reset cycle to complete drying, if needed.

When using Air Only

Check that coverings are securely stitched.
Shake and fluff pillows by hand periodically during the cycle.
Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Air Only is not available with Automatic Cycles.

Options

You can customize your cycles by selecting options.

Drum Light

On some models, select Drum Light to turn on the light inside the

dryer drum. During a cycle, if Drum Light is selected, the drum

light turns on and will remain on until DRUM LIGHT is pressed

again, the door is opened and closed, or the door is left open for

5 minutes.
When the dryer is not running, the drum light will turn on when

DRUM LIGHT is pressed or the dryer door is opened, and it will

remain on until the dryer door has been open for 5 minutes, the

dryer door is closed, or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.

WRINKLE SHIELD™ Setting

The WRINKLE SHIELD™ setting helps keep wrinkles from

forming when you cannot unload the dryer promptly at the end

of a cycle. During this option, the dryer stops tumbling and then

tumbles again for a brief period.

Press the WRINKLE SHIELD™ setting to get up to

120 minutes of heat-free, periodic tumbling at the end

of a cycle.
Stop the WRINKLE SHIELD™ setting at any time by pressing

WRINKLE SHIELD™ setting or opening the dryer door.
For the Perm Press/Casual Cycle, the WRINKLE SHIELD™

setting is preset to ON. The other Automatic Cycles will retain

the WRINKLE SHIELD™ setting. For example, if you select

the WRINKLE SHIELD™ setting in the Normal cycle, the

WRINKLE SHIELD™ setting will be on the next time you

select the Normal cycle.

NOTE: If you do not select the WRINKLE SHIELD™ setting, the

dryer stops after cool down.

Damp Dry Signal

Select the Damp Dry Signal to alert you that your clothes are

approximately 80% dry. This is useful when you want to remove

lightweight items in a mixed load to avoid overdrying or remove

partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in a

mixed load. When the signal goes off, open the door to stop the

dryer, rearrange the load inside the dryer, close the door and

restart the dryer to finish the drying cycle. Rearranging the load

will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the Automatic

Cycles.

*

e

m

i

T

d

a

o

L

f

o

e

p

y

T

(Minutes)

Foam rubber - pillows, padded bras, stuffed toys

20 - 30

Plastic - Shower curtains, tablecloths

20 - 30

0

5

-

0

4

s

g

u

r

d

e

k

c

a

b

-

r

e

b

b

u

R

Olefin, polypropylene, sheer nylon

10 - 20

Advertising
Ce manuel est liée aux produits suivants: