Whirlpool 400 - Manuel (Page 18)

18
Understanding the status indicators
Lock Out
The Lock Out feature lets you lock out the
function of the control
pads. When using Lock
Out, you cannot start
the dishwasher.
To use Lock Out:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator glows.
To turn off Lock Out:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator turns off.
Washing
The Washing indicator glows at the start of
the first fill of any cycle
(except Rinse/Wash
Later) and remains
on until the end of the
main wash.
Water Heating
The Water Heating indicator glows whenever
water is heated during a
cycle.
LOCK OUT LOCK OUT
AIR DRY AIR DRY
DRYING
CLEAN
RINSING
WASHING
WATER HEATING WATER HEATING
S E T T I N G T H E C O N T R O L S
Rinsing
The Rinsing indicator glows during the last
2 rinses of all cycles.
Drying
The Drying indicator glows during the drying
portion of each cycle –
even if you select Air Dry.
It turns off at the end of
the cycle. If dishes are
not as dry as you expected when using Air
Dry, either allow longer drying times (over-
night) or do not use Air Dry.
Clean
The Clean indicator glows at the end of a
cycle to show that the
load is clean. All other
indicators turn off. The
Clean indicator glows
until you press Cancel/Drain or any other
control pad.