Using cancel/drain, Selecting cycle options, High temp wash – Whirlpool 400 Manuel d'utilisation

Page 15: Air dry

Advertising
background image

15

Using Cancel/Drain

Press Cancel/Drain to cancel a cycle or to

clear the indicators.

To cancel a cycle:

Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start.
If desired, select a new cycle. (See the
“Changing a cycle or option setting” section.)

You can press Cancel/Drain again to stop
the drain immediately. Remember to drain
the dishwasher again before starting a
new cycle.

NOTE:

A small amount of water remaining

in the dishwasher is normal.

Selecting cycle options

You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used. For
example, you can press Air Dry anytime
before the Drying indicator glows.

After a wash cycle, the dishwasher

remembers the chosen options and uses the
same options in the next wash cycle unless
new options are selected or the Cancel/
Drain pad is pressed.

High Temp Wash

When High Temp Wash is selected, the

dishwasher heats the water
during the main wash of the Low
Energy/China and Normal cycles.
Heating the water helps improve
washing results. The Pots-N-Pans

cycle automatically uses High Temp Wash.

CANCEL

DRAIN

Air Dry

When Air Dry is selected, the air in the

dishwasher is not heated during
the “dry” portion of a cycle. Using
Air Dry helps save energy, but
dishes take longer to dry and
some spotting can occur.

Some items (such as plastics) may need
towel drying. For best drying, use a liquid
rinse agent.

NOTE:

The dishwasher automatically

heats the air in the dishwasher during the
“dry” portion of the cycle unless you select
Air Dry.

AIR DRY

AIR DRY

HIGH

TEMP

WASH

S E T T I N G T H E C O N T R O L S

To clear the indicators:

Press Cancel/Drain before starting the
dishwasher to clear all cycle and option
selections.

Advertising