Electronic oven controls, Display, Cancel – Whirlpool GGE388LX Manuel d'utilisation

Page 8: Oven lights, Kitchen timer, Settings

Advertising
background image

8

ELECTRONIC OVEN CONTROLS

This manual covers different models. The range you have purchased may have some or all of the items listed. The locations and
appearances of the items shown here may not match those of your model.

Display

When power is first supplied to the range, or if a power failure has
occurred, 12:00 will appear on the display. See “Clock” in the
“Settings” section to set time of day.

When the oven is not in use, the display shows the time of day,
unless the oven is in Energy Save mode.

Cancel

The Cancel pad stops any function except the Clock, Timer and
Control Lock.

Oven Lights

While the oven doors are closed, press OVEN LIGHT to turn the
lights on and off. Both oven lights will come on when either door
is open. The oven lights will not come on during the Self-Clean
cycle.

Kitchen Timer

The Kitchen Timer can be set in hours or minutes up to 9 hours
and 59 minutes, and counts down the set time. The Kitchen
Timer does not start or stop the oven.

To Set:

1. Press TIMER SET/OFF pad.

“Set TIMER” will scroll down the upper text display area and
the clock will display “--:--” with the colon flashing.

2. Press the Temp/Time “up” or “down” arrow pads until the

desired time is reached.

“Press TIMER” will scroll down the upper text display area.

3. Press TIMER SET/OFF to start the timer.

The colon stops flashing, and the time begins counting down.
“TIMER STARTED” will scroll down the upper text display
area.

The last minute of the timer countdown will be displayed in
seconds.

At the end of the set time, one long beep will sound, and
“TIMER End” will be displayed.

4. Press TIMER SET/OFF to clear the display.

NOTE: A reminder beep will sound until the Kitchen Timer is
canceled.

To Cancel:

Press the TIMER SET/OFF pad.

Settings

Energy Save

The Energy Save mode deactivates the display to reduce energy
consumption.

To Activate the Energy Save Mode:

1. Press and hold SETTINGS for 3 seconds. “Energy save on.”

will appear in the upper text area.

2. The setting will be activated after 5 minutes.

Any mode may be used with the range in Energy Save by
simply selecting the desired mode.

To Deactivate the Energy Save Mode:

1. Press and hold SETTINGS for 3 seconds. “Energy save off.”

will appear in the upper text area.

2. The clock will reappear in the display, and the range can be

operated as usual.

Fahrenheit and Celsius

The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.

1. Press SETTINGS once.

“TEMP UNIT” appears in the upper text area while
“FAHRENHEIT. Press (^) for Celsius” will scroll twice from
right to left in the lower text area.

2. Press the Temp/Time “up” arrow pad to change the

temperature unit setting.

“CELSIUS. Press (^) for Fahrenheit” will scroll twice from right
to left in the lower text area.

3. “CELSIUS Selected” will scroll right to left in the lower text

area. The temperature units have been changed.

A. Upper oven settings
B. Oven display

C. Temperature/Time adjust
D. Upper oven start

E. Upper oven cancel

F. Steam/Precise Clean

G. Oven light/control lock
H. Warm zone

I. Lower oven cancel

J. Lower oven start

K. Settings

L. Clock

M. Timer set/off

N. Start time

O. Cook time

P. Lower oven settings

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Advertising
Ce manuel est liée aux produits suivants: