Troubleshooting – Whirlpool GGE388LX Manuel d'utilisation

Page 21

Advertising
background image

21

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

Has a household fuse blown, or has a circuit breaker
tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.

Cooktop will not operate

Is the control knob set correctly?
Push in knob before turning to a setting.

On ceramic glass models, is the oven control lockout set?
See “Control Lockout” section.

Excessive heat around cookware on cooktop

Is the cookware the proper size?
Use cookware about the same size as the surface cooking
area, element or surface burner. Cookware should not extend
more than ½" (1.3 cm) outside the cooking area.

Hot Surface indicator light stays on

Does the Hot Surface indicator light stay on after control
knob(s) have been turned off?
See “Cooktop Controls” section.

Cooktop cooking results not what expected

Is the proper cookware being used?
See “Cookware” section.

Is the control knob set to the proper heat level?
See “Cooktop Controls” section.

Is the range level?
Level the range. See the Installation Instructions.

Oven will not operate

Is the electronic oven control set correctly?
See “Electronic Oven Controls” section.

Has a delay start been set?
See “Timed/Delay Cooking” section.

On some models, is the oven control lockout set?
See “Control Lockout” section.

On some models, is the Sabbath Mode set?
See the “Automatic Shutoff/Sabbath Mode” section.

Oven temperature too high or too low

Does the oven temperature calibration need adjustment?
See “Oven Temperature Control” section.

Oven indicator lights flash

Do the oven indicator lights flash?
See the “Display” and/or the “Oven Light” section. If the
indicator light(s) keeps flashing, call for service. See
“Assistance or Service” section.

Clock not displayed

Is the range in Energy Save Mode?
See “Energy Save” in the “Settings” section.

No tones sound when keys are pressed

Have the tones been deactivated?
See “Tones” in the “Settings” section.

Display shows messages

Is the display showing “12:00”?
There has been a power failure. Clear the display. See
“Display” section. On some models, reset the clock, if
needed. See “Clock” in the “Settings” section.

Is the display showing a letter followed by a number?
Depending on your model, press OFF/CANCEL, OFF or
CANCEL/OFF to clear the display. See “Display” in the
“Electronic Oven Controls” section. If it reappears, call for
service. See “Assistance or Service” section.

Self-Cleaning cycle will not operate

Is the oven door open?
Close the oven door all the way.

Has the function been entered?
See “Self-Cleaning Cycle” section.

On some models, has a delay start Self-Clean cycle been
set?
See “Self-Cleaning Cycle” section.

Has a delay start been set?
See “Timed/Delay Cooking” section.

Oven cooking results not what expected

Is the range level?
Level the range. See the Installation Instructions.

Is the proper temperature set?
Double-check the recipe in a reliable cookbook.

Is the proper oven temperature calibration set?
See “Oven Temperature Control” section.

Was the oven preheated?
See “Baking” and “Broiling” sections.

Is the proper bakeware being used?
See “Bakeware” section.

Are the racks positioned properly?
See “Positioning Racks and Bakeware” section.

Advertising
Ce manuel est liée aux produits suivants: