Eject lever, Notes on storing, Replacing – Sony DPP-MS300E Manuel d'utilisation

Page 16

Advertising
background image

16

GB

Setting Up

Repair with
transparent tape.

Loading the print cartridge (continued)

Notes on storing the
print cartridge
• Avoid placing the

cartridge in a location
subject to:
– high temperatures
– high humidity
– excessive dust
– direct sunlight

• When you are going to

store a partially-used
cartridge for an
extended period of
time, store it in its
original bag.

If ink ribbon should tear
Repair the ribbon with
transparent tape. There
should be no problem
with using the remaining
portion of the ribbon.
Before loading the print
cartridge into the printer,
turn the reel until the
transparent tape can no
longer be seen.

To eject the print cartridge

Open the cartridge compartment lid and push up the
eject lever. Then remove the print cartridge.

To replace the print cartridge

If you try to print when the ink ribbon of the print
cartridge runs out, the print paper is automatically
loaded and then ejected and the cartridge error
indicator flashes.

Remove the print paper. Then open the cartridge
compartment lid and replace the used print cartridge
with the new one.

The ejected print paper can be used again.

Push up the eject lever,
then remove the used
print cartridge.

Eject lever

Cartridge error indicator

v

Advertising
Ce manuel est liée aux produits suivants: