Classic ep screen, Changing the preset sounds, Using the presets – Roland SRX-12 Manuel d'utilisation

Page 9: Using the manual controls

Advertising
background image

9

About the SRX-12 dedicated piano mode (for Fantom-X6/X7/X8 users)

1.

In the Piano Mode (Classic EP) screen, press [F2] to access
the following screen.

fig.EP-Preset_60

2.

Press [F3 (Preset 1)]–[F8 (Preset 6)] to select the desired
sound.

Default setting

Changing the preset sounds

1.

Hold down [SHIFT] and press one of the [F3]–[F8] buttons.

The patch list will appear.

2.

Select a patch, and press the [F8 (SELECT)] button.

The selected patch will be assigned to the button ([F3]–[F8]) you
pressed in step 1.

*

For details on how to select patches, refer to the Fantom-X6/X7/X8
owner’s manual.

1.

In the Piano Mode (Classic EP) screen, press [F2] to access
the following screen.

fig.EP-Manual_60

2.

Use [F3 (Type)]–[F8 (Speaker SIM)] and the REALTIME
CONTROL knobs to adjust the sound.

*

You can use only one of the effects (chorus, phaser, equalizer, or
speaker simulator).

[F3 (Type)]

This selects the type of electric piano.

Successive presses of the button cycle you through the types like this:

Type 1

Type 2

Type 3

Type 1

...

[F4 (Cond/Trem)]

This modifies the Condition setting, and adjusts the tremolo (an
effect that cyclically varies the volume) and panning (an effect that
moves the position of the sound between left and right).

When you press this button, the following functions will be assigned
to realtime control knobs 1–3.

[F5 (Chorus)]

Switches the chorus on/off.

When you switch chorus on, the following functions will be assigned
to realtime control knobs 1–3.

Classic EP screen

Using the presets

Preset

Patch No. & Name

Preset

Patch No. & Name

1

1 Pure EP1

4

4 Phaser EP1

2

2 Lo-Fi EP1

5

5 Soft Wurly

3

3 Pure EP2

6

6 Pure Wurly

Using the manual controls

Knob

Function

Explanation

1

Condition

Selects the state of the electric piano
over a range of five stages.

If you turn the knob to the right
(Mint), you’ll get a clear tone
like that of an electric piano in
brand-new condition.
As you turn the knob toward
the left (Vint.), the pitch and
tone will change to a more vin-
tage character.

2

Tremolo Rate

Adjusts the speed of tremolo/pan-
ning. Turn the knob toward the
right to increase the speed.

3

Tremolo Depth

Adjusts the depth (width) of the
tremolo/panning. Turn the knob
toward the right to make the trem-
olo/panning deeper (wider).

If you turn the knob while holding
down [SHIFT], there will be no
panning effect; the tremolo will be
monaural.

Knob

Function

Range

Explanation

1

Rate

0.05–10.00
(Hz)

Adjusts the modulation
speed of the chorus. Turn
the knob toward the right
for faster modulation.

2

Depth

0–127

Adjusts the modulation
depth of the chorus. Turn
the knob toward the right
for deeper modulation.

3

Balance

D100:0W–
D0:100W

Adjusts the volume balance
between the original (dry)
sound (D) and the chorus
(wet) sound (W). Turn the
knob toward the right to in-
crease the chorus sound. If
you turn the knob all the
way toward the left, you
will hear only the original
sound, and there will be no
chorus effect.

SRX-12_je.book 9 ページ 2006年4月11日 火曜日 午前11時6分

Advertising