Classic clav screen, Changing the preset sounds, Saving your settings – Roland SRX-12 Manuel d'utilisation

Page 11: Using the presets, Using the manual controls

Advertising
background image

11

About the SRX-12 dedicated piano mode (for Fantom-X6/X7/X8 users)

1.

In the Piano Mode (Classic Clav) screen, press [F2] to
access the following screen.

fig.Clav-Preset_60

2.

Press [F3 (Preset 1)]–[F8 (Preset 6)] to select the desired
sound.

Default setting

Changing the preset sounds

1.

Hold down [SHIFT] and press one of the [F3]–[F8] buttons.

The patch list will appear.

2.

Select a patch, and press the [F8 (SELECT)] button.

The selected patch will be assigned to the button ([F3]–[F8]) you
pressed in step 1.

*

For details on how to select patches, refer to the Fantom-X6/X7/X8
owner’s manual.

1.

In the Piano Mode (Classic Clav) screen, press [F2] to
access the following screen.

fig.Clav-Manual_60

2.

Use [F3 (Bite/Pickup)]–[F8 (Mute)] and the REALTIME
CONTROL knobs to adjust the sound.

[F3 (Bite/Pickup)]

This lets you switch between five popular processes (effects) used for
clavi, and lets you change the type of pickup.

When you press this button, the following functions will be assigned
to realtime control knobs 1 and 2.

Timbre

You can vary the tone by using the timbre switches that divide the
sound into four ranges.

[F4]–[F7] will turn each range on/off.

Each time you press a button, it will alternately turn on or off.

[F4 (Brilliant)]:

High-frequency range

[F5 (Treble)]:

High-mid frequency range

[F6 (Medium)]:

Low-mid frequency range

[F7 (Soft)]:

Low-frequency

range

*

If you turn all four of these off, you won’t hear any sound.

[F8 (Mute)]

Switches the mute on/off.

If you turn the mute on, you’ll get a sound with a shorter sustain and
an attenuated high-frequency range.

Saving your settings

• The current settings will be preserved when you switch from

the Classic Clav screen to another screen.

• A sound you edit using the manual controls can be saved by

pressing [WRITE] and saving it as a Fantom-X6/X7/X8 user
patch. For details on how to save a sound, refer to the Fantom-
X6/X7/X8 owner’s manual.

Classic Clav screen

Using the presets

Preset

Patch No. & Name

Preset

Patch No. & Name

1

7 Pure Clav DB

4

10 Wah Clav CB

2

8 Pure Clav CB

5

11 Comp Clav CB

3

9 PhaseClav CB

6

12 PureClavMtCB

Using the manual controls

Knob

Function

Explanation and range

1

Bite

Selects the type of effect to use.

Dry:

No effect will be applied.

Comp (Compressor):

Loud sounds will be compressed and
soft sounds will be boosted, thus making
the volume more consistent and creating
a sense of enhanced loudness.

Enhancer:

Boosts the harmonic content to add spar-
kle and clarity to the sound.

Auto Wah:

Varies the cutoff frequency of the filter
according to the volume, making loud
sounds brighter and soft sounds more
mellow.

Overdrive:

Distorts the sound, making it more pow-
erful.

2

Pickup

Switches between four types of pickup setting.

CA (Lower):

Mild tone

CB (Upper):

Bright tone

DA (Upper + Lower, out of phase):

Thin (light) sound that cuts the low-fre-
quency range

DB (Upper + Lower, in phase):

The sound of two pickups heard together

SRX-12_je.book 11 ページ 2006年4月11日 火曜日 午前11時6分

Advertising