Saving your settings – Roland SRX-12 Manuel d'utilisation

Page 10

Advertising
background image

10

About the SRX-12 dedicated piano mode (for Fantom-X6/X7/X8 users)

[F6 (Phaser)]

Switches the phaser on/off.

When you switch the phaser on, the following functions will be
assigned to realtime control knobs 1–4.

[F7 (EQ)]

Switches the equalizer on/off.

When you switch the equalizer on, the following functions will be
assigned to realtime control knobs 1–4.

[F8 (Speaker SIM)]

Switches the speaker simulator on/off.

When you switch the speaker simulator on, the following functions
will be assigned to realtime control knobs 1–4.

Specifications of each speaker type

The “Speakers” column indicates the diameter of each speaker unit
(in inches) and the number of units.

Saving your settings

• The current settings will be preserved when you switch from

the Classic EP screen to another screen.

*

The effect on/off status is preserved, but the knob settings of each effect
are not preserved.

• A sound you edit using the manual controls can be saved by

pressing [WRITE] and saving it as a Fantom-X6/X7/X8 user
patch. For details on how to save a sound, refer to the Fantom-
X6/X7/X8 owner’s manual.

Knob

Function

Range

Explanation

1

Manual

0–127

Adjusts the pitch at which
the phaser is applied. As
you turn the knob toward
the right, the phaser will be
applied to a higher pitch
range.

2

Rate

0.05–10.00
(Hz)

Adjusts the modulation
speed of the phaser. Turn
the knob toward the right
for faster modulation.

3

Depth

0–127

Adjusts the modulation
depth of the phaser. Turn
the knob toward the right
for deeper modulation.

4

Reso-
nance

0–127

Adjusts the amount of reso-
nance. Turn the knob to-
ward the right to increase
the resonance, producing a
more strongly distinctive
modulation.

Knob

Function

Range

Explanation

1

Low Gain

-15– +15 (dB)

Adjusts the amount
of boost/cut for the
low-frequency range.

2

Mid Gain

-15– +15 (dB)

Adjusts the amount
of boost/cut for the
mid-frequency range.

3

High
Gain

-15– +15 (dB)

Adjusts the amount
of boost/cut for the
high-frequency
range.

4

Level

0–127

Adjusts the output
volume of the equal-
izer.

* If you turn the knob

all the way toward
the left, there will be
no sound.

Knob

Function

Range

Explanation

1

Speaker

(see below)

Selects the type of speaker.

2

Mic Level

0–127

Adjusts the volume of the
mic that picks up the
sound from the speaker.

3

Dir Level

0–127

Adjusts the volume of the
direct sound.

4

Level

0–127

Adjusts the output vol-
ume.

Type

Cabinet

Speakers

Mic

SMALL 1

Small open back

10" x 1

Dynamic

SMALL 2

Small open back

10" x 1

Dynamic

MIDDLE

Open back

12" x 1

Dynamic

JC-120

Open back

12" x 2

Dynamic

BUILT-IN 1

Open back

12" x 2

Dynamic

BUILT-IN 2

Open back

12" x 2

Condenser

BUILT-IN 3

Open back

12" x 2

Condenser

BUILT-IN 4

Open back

12" x 2

Condenser

BUILT-IN 5

Open back

12" x 2

Condenser

BG STACK 1

Sealed

12" x 2

Condenser

BG STACK 2

Large sealed

12" x 2

Condenser

MS STACK 1

Large sealed

12" x 4

Condenser

MS STACK 2

Large sealed

12" x 4

Condenser

METAL
STACK

Large double stack

12" x 4

Condenser

2-STACK

Large double stack

12" x 4

Condenser

3-STACK

Large triple stack

12" x 4

Condenser

SRX-12_je.book 10 ページ 2006年4月11日 火曜日 午前11時6分

Advertising