97 creating a performance, Knob, Switch – Roland Piano Manuel d'utilisation
Page 97
97
Creating a Performance
Creating a Performance
Realtime Controller / D Beam
Controller Settings (Controller)
fig.06-11_50
For details on the setting, refer to
Knob
Assign 1–4 (Realtime Control Knob Assign 1–4)
Specify the functions that will be controlled by the [
]–[
] knobs.
Value
OFF:
The realtime control knob will not be used.
CC01–31, 33–95:
Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to
“MIDI Implementation”
(Sound/Parameter List).
PITCH BEND:
Pitch Bend
AFTERTOUCH:
Aftertouch
TEMPO:
Tempo
ARP VAR:
Arpeggio Variation
ARP ACCENT:
Arpeggio Accent Rate
ARP SHFFLE:
Arpeggio Shuffle Rate
ARP OCTAVE:
Arpeggio Octave Range
PTN ACCENT:
Rhythm Pattern Accent Rate
PTN SHFFLE:
Rhythm Pattern Shuffle Rate
Zone 1–4 (Realtime Control Knob Zone
Number 1–4)
Specify the zone that will be controlled by each knob [
]–[
].
The effect will apply only to the part that is connected to the zone
you specify here.
Value:
1–16
Switch
Assign 1–4 (Realtime Control Button Assign 1–
4)
Specify the functions that will be controlled by the [
]–[
]
buttons.
Value
OFF:
The realtime control button will not be used.
CC01–31, 33–95:
Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to
“MIDI Implementation”
(Sound/Parameter List).
BEND UP:
Raises the pitch in semitone steps (up to 4 octaves
higher).
BEND DOWN:
Lowers the pitch in semitone steps (up to 4 octaves
lower).
AFTERTOUCH:
Aftertouch
OCT UP:
Raises the key range in octave steps (up to 3 octaves
higher).
OCT DOWN:
Lowers the key range in octave steps (up to 3 octaves
lower).
TRNS UP:
Raises the key range in semitone steps (up to 6 semitones
higher).
TRNS DOWN:
Lowers the key range in semitone steps (up to 5
semitones lower).
TAP TEMPO:
Tap tempo (a tempo specified by the interval at which
you press the button).
MONO/POLY:
Pressed to toggle between polyphonic (POLY) and
monophonic (MONO) play of a patch.
ARP HOLD:
Switch between Hold On/Hold Off for the Arpeggiator
performance.
PTN HOLD:
Switch between Hold On/Hold Off for the Rhythm
pattern playback.
ZONE INT:
Turn the Internal Switch on/off for the zone.
ZONE EXT:
Turn the External Switch on/off for the zone.
Mode 1–4 (Realtime Control Button Mode 1–4)
Specify how the [
]–[
] buttons are to operate.
Value
MOMENTARY:
The button will be on only while you are pressing
(holding) it, and will be off when you release your finger from the
button.
LATCH:
The button will switch on/off each time you press it.
Zone 1–4 (Realtime Control Button Zone
Number 1–4)
Specify the zone that will be controlled by each button [
]–[
].
The effect will apply only to the part that is connected to the zone
you specify here.
Value:
1–16