Roland Piano - Manuel (Page 52)

52
Creating a Patch
Shuffle Rate (Arpeggio Shuffle Rate)
This setting lets you modify the note timing to create shuffle
rhythms.
With a setting of “50%” the notes will be spaced evenly. As the value
is increased, the note timing will have more of a “dotted” (shuffle)
feel.
Value: 0–100%
fig.Shuffle Rate
Shuffle Resolution (Arpeggio Shuffle
Resolution)
Specify the timing resolution in terms of a note value. The note value
can be specified as either an 16th note or a eighth note.
Value: ,
Keyboard Velocity (Arpeggio Keyboard
Velocity)
Specifies the loudness of the notes that you play.
If you want the velocity value of each note to depend on how
strongly you play the keyboard, set this parameter to “REAL.” If you
want each note to have a fixed velocity regardless of how strongly
you play the keyboard, set this parameter to the desired value (1–
127).
Value: REAL, 1–127
Octave Range (Arpeggio Octave Range)
Sets the key range in octaves over which arpeggio will take place. If
you want the arpeggio to sound using only the notes that you
actually play, set this parameter to “0.” To have the arpeggio sound
using the notes you play and notes 1 octave higher, set this
parameter to “+1.” A setting of “-1” will make the arpeggio sound
using the notes you play and notes 1 octave lower.
Value: -3– +3
Key Trigger (Arpeggio Key Trigger)
Turn this “ON” if you want the arpeggio to start at the moment that
you press the key. If you want the arpeggio to start playing in
synchronization with the sequencer or rhythm pattern, turn this
“OFF.”
Value: OFF, ON
Realtime Controller / D Beam
Controller Settings (Controller)
fig.03-12_50
For details on the setting, refer to “How to Make the Patch
Settings” (p. 42).
Knob
Assign 1–4 (Realtime Control Knob Assign 1–4)
Specify the functions that will be controlled by the [ ]–[ ] knobs.
Value
OFF: The realtime control knob will not be used.
CC01–31, 33–95: Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to
“MIDI Implementation” (Sound/Parameter List).
PITCH BEND: Pitch Bend
AFTERTOUCH: Aftertouch
TEMPO: Tempo
ARP VAR: Arpeggio Variation
ARP ACCENT: Arpeggio Accent Rate
ARP SHFFLE: Arpeggio Shuffle Rate
ARP OCTAVE: Arpeggio Octave Range
Switch
Assign 1–4 (Realtime Control Button Assign 1–
4)
Specify the functions that will be controlled by the [ ]–[ ]
buttons.
Value
OFF: The realtime control button will not be used.
CC01–31, 33–95: Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to
“MIDI Implementation” (Sound/Parameter List).
90 10 90 10 50 50 50 50
Shuffle Rate = 50% Shuffle Rate = 90%