Roland Piano - Manuel (Page 40)

40
Playing in Patch Mode
Playing Percussion Instruments
In Patch mode, you can play percussion instruments from the
keyboard by selecting a rhythm set. As the rhythm tone assigned to
each key varies by the rhythm set selected, you can play a wide
range of percussion instruments.
Selecting a Rhythm Set
The Fantom has three rhythm set groups, including the User group,
Preset group and GM group, with 16 rhythm sets in the User group,
16 rhythm sets in Preset group, and 9 rhythm sets in GM group, for a
total of 41 rhythm sets. What’s more, you can further expand your
options by installing up to three optional Wave Expansion Boards
(one SR-JV80, two SRX series), enabling you to select from a large
selection of rhythm sets.
USER
This is the group inside the Fantom which can be rewritten. rhythm
sets you yourself create can be stored in this group. The Fantom
includes 16 preset rhythm sets.
PRST (Preset)
This is the group inside the Fantom which can be rewritten.
However, you can modify the settings of the currently selected
rhythm set, and then save the modified settings in User memory.
The Fantom contains 16 preset rhythm sets.
GM (GM2)
This is an internal group of rhythm sets compatible with General
MIDI 2, a system of MIDI function specifications designed to
transcend differences between makers and types of devices; these
rhythm sets cannot be overwritten. Furthermore, settings of
currently selected rhythm sets from this group cannot be changed.
The Fantom includes nine preset rhythm sets.
XP-A–C (Wave Expansion Boards installed in
EXP-A–C Slots)
These groups are for when using rhythm sets from a Wave
Expansion Board installed in slots EXP A–C, and cannot be
rewritten. However, you can modify the settings of the currently
selected rhythm set, and then save the modified settings in User
memory. The number of onboard rhythm sets depends on the
specific Wave Expansion Boards installed.
A Rhythm Set XP-A–C cannot be accessed if the Wave
Expansion Board it belongs to has not been installed.
XP-A (EXP A slot): SR-JV80 series (sold separately)
XP-B, C (EXP B, C slots): SRX series (sold separately)
1. Access the PATCH PLAY screen (p. 31).
2. Use [CURSOR] to move the cursor to “PATCH.”
fig.02-14
3. Turn the VALUE dial, or press [INC] to select “RHYTHM.”
A screen like the following appears, allowing you to select a
rhythm set.
fig.02-15.e
4. Press [CURSOR] to move the cursor to the rhythm set
group.
5. Turn the VALUE dial or press [INC]/[DEC] to select the
rhythm set group.
USER: User
PRST: Preset
GM: Preset GM (GM2)
XP-A–C: Wave Expansion Boards installed in EXP-A–C Slots
6. Press [CURSOR] to move the cursor to the rhythm set
number.
7. Turn the VALUE dial or press [INC]/[DEC] to select the
rhythm set number.
You can select favorite rhythm sets in the same way as when
selecting patches. For details on the procedure, refer to
“Selecting Favorite Patches (Favorite Sound)” (p. 33).
Rhythm set number
Rhythm set group