Roland Piano - Manuel (Page 18)

18
Panel Descriptions
Rear Panel
fig.00-02
fig.00-03
POWER ON Switch
Press to turn the power on/off. → (Quick Start; p. 4)
AC Inlet
Connect the included power cord to this inlet. → (Quick Start; p. 3)
fig.00-04
CTL 1, CTL 2 PEDAL Jack
You can connect optional expression pedals (EV-5, etc.) to these
jacks. By assigning a desired function to a pedal, you can use it to
select or modify sound or perform various other control. You can
also connect optional pedal switches (DP-2, DP-6, etc.) to sustain
sound.
→ (Quick Start; p. 29)
HOLD PEDAL Jack
An optional pedal switch (DP-2, DP-6, etc.) can be connected to this
jack for use as a hold pedal.
→ (Quick Start; p. 28)
This can also be set so it supports the use of half-pedaling
techniques. So, after connecting an optional expression pedal (EV-5,
etc.), you can employ pedal work to achieve even finer control in
performances in which piano tones are used.
→ (p. 184)
fig.00-05
DIGITAL OUT Connectors
(S/P DIF OPTICAL, S/P DIF COAXIAL)
The Fantom features both optical and coaxial digital out connectors
(conforming to S/P DIF).
These connectors output a digital audio signal (stereo). The output
signal is identical to the signal that is output from the OUTPUT A
(MIX) jacks.
S/P DIF is a digital interface format used for consumer digital
audio devices.
fig.00-06
CONTRAST Knob
Adjusts the display contrast. → (Quick Start; p. 5)
fig.00-07
MIDI Connectors (IN, OUT, THRU)
These connectors can be connected to other MIDI devices to receive
and transmit MIDI messages.
fig.00-08
OUTPUT A (MIX) Jacks (L (MONO), R)
These jacks output the audio signal to the connected mixer/amplifier
system in stereo. For mono output, use the L jack.
→ (Quick Start; p.
3)
OUTPUT B Jacks (L, R)
These jacks output the audio signal to the connected mixer/amplifier
system in stereo.
INDIVIDUAL 1–4 Jacks
These jacks output audio signals in mono to an amp or mixer.
The setting determining whether these jacks are used as stereo
OUTPUT jacks or monaural INDIVIDUAL jacks is made with
the Output Assign setting (p. 168, p. 172).
PHONES Jack
This is the jack for connecting headphones (sold separately). →
(Quick Start; p. 3)