Deleting unwanted measures (delete), Copying phrases (copy), 143 editing songs – Roland Piano Manuel d'utilisation
Page 143
143
Editing Songs
Editing Songs
Deleting Unwanted Measures
(Delete)
This function deletes a specified area of sequencer data, and moves
the subsequent data to fill the gap. As a result, the measure length
will be shortened by the number of deleted measures.
1.
Access the Song Edit screen, and then load the song you
2.
Press [8 (Track Edit)].
The Track Edit window appears.
3.
Press
or
to select “Delete,” and then press [8
(Select)].
A message of “DELETE: Select target point.” will be displayed.
4.
Use [CURSOR] to move the cursor to the first measure of the
track or pattern that you want to delete. If you want to
specify all tracks, press [7 (TrkAll)].
5.
Hold down [SHIFT] and press
to move the cursor to the
last measure of the track or pattern that you want to delete,
and press [8 (Select)] to specify it.
The Track Edit (Delete) window appears.
fig.11-16_50
6.
Use [CURSOR] to move the cursor to the desired parameter,
and turn the VALUE dial or press [INC]/[DEC] to make the
setting. First check the region that is to be affected by the
operation, and correct it if necessary.
Track
Check/correct the track(s) or pattern that is to be deleted.
Value
ALL:
Phrase tracks 1–16, the beat track, and the tempo track
TRK 1–TRK 16:
The specified phrase track
TEMPO:
Tempo track
PTN001–PTN100:
The specified pattern
Measure, for (Edit Range)
Check/correct the range of measures that are to be deleted. If you set
“for” to “ALL,” all measures will be specified.
7.
When you have finished making settings, press [8 (Execute)]
to execute the operation.
Copying Phrases (Copy)
This function copies a specified area of sequencer data. It is
convenient for repeating the same phrase several times. You can
copy patterns to a phrase track, or copy data from a phrase track to a
pattern.
1.
Access the Song Edit screen, and then load the song you
2.
Press [8 (Track Edit)].
The Track Edit window appears.
3.
Press
or
to select “Copy,” and then press [8
(Select)].
A message of “COPY: Select source point.” appears.
4.
Use [CURSOR] to move the cursor to the first measure of the
copy-source track or pattern. If you want to specify all
tracks, press [7 (TrkAll)].
5.
Hold down [SHIFT] and press
to move the cursor to the
last measure of the copy-source track or pattern, and press
[8 (Select)] to specify it.
A message of “COPY: Select destination point.” appears.
6.
Use [CURSOR] to move the cursor to the measure of the
copy-destination track or pattern, and press [8 (Select)] to
specify it.
The Track Edit (Copy) window appears.
fig.11-17_50
7.
Use [CURSOR] to move the cursor to the desired parameter,
and turn the VALUE dial or press [INC]/[DEC] to make the
setting. First check the region that is to be affected by the
operation, and correct it if necessary.
Track (Source Track)
Check/modify the copy-source track(s) or pattern.
Value
ALL:
Phrase tracks 1–16, the beat track, and the tempo track
TRK 1–TRK 16:
The specified phrase track
TEMPO:
Tempo track
PTN001–PTN100:
The specified pattern
Measure, for (Edit Range)
Check/modify the range of copy-source measures. If you set “for” to
“ALL,” all measures will be specified.