Roland Piano - Manuel (Page 119)

119
Creating a Multitimbre
Creating a Multitimbre
Mute Switch
Temporarily mutes (MUT) or releases the mute (OFF) for the
performance of each part.
Use this setting when, for example, you want to use the instrument
for karaoke by muting the part playing the melody, or when you
want to play something using a separate sound module.
Value: OFF, MUT
The Mute Switch parameter does not turn the part off, but sets
the volume to minimum so that no sound is heard. Therefore,
MIDI messages are still received.
MIDI Filter
Program Change (Receive Program Change
Switch)
For each MIDI channel, specify whether MIDI Program Change
messages will be received (ON), or not (OFF). Assigning a check
mark (✔) will turn it on, and removing the check mark will turn it
off.
Bank Select (Receive Bank Select Switch)
For each MIDI channel, specify whether MIDI Bank Select messages
will be received (ON), or not (OFF). Assigning a check mark (✔) will
turn it on, and removing the check mark will turn it off.
Pitch Bend (Receive Pitch Bend Switch)
For each MIDI channel, specify whether MIDI Pitch Bend messages
will be received (ON), or not (OFF). Assigning a check mark (✔) will
turn it on, and removing the check mark will turn it off.
Channel Pressure (Receive Channel Pressure
Switch)
For each MIDI channel, specify whether MIDI Channel Pressure
messages will be received (ON), or not (OFF). Assigning a check
mark (✔) will turn it on, and removing the check mark will turn it
off.
Poly Key Pressure (Receive Polyphonic Key
Pressure Switch)
For each MIDI channel, specify whether MIDI polyphonic key
pressure messages will be received (ON), or not (OFF). Assigning a
check mark (✔) will turn it on, and removing the check mark will
turn it off.
Modulation (Receive Modulation Switch)
For each MIDI channel, specify whether MIDI Modulation messages
will be received (ON), or not (OFF). Assigning a check mark (✔) will
turn it on, and removing the check mark will turn it off.
Volume (Receive Volume Switch)
For each MIDI channel, specify whether MIDI Volume messages will
be received (ON), or not (OFF). Assigning a check mark (✔) will turn
it on, and removing the check mark will turn it off.
Pan (Receive Pan Switch)
For each MIDI channel, specify whether MIDI Pan messages will be
received (ON), or not (OFF). Assigning a check mark (✔) will turn it
on, and removing the check mark will turn it off.
Expression (Receive Expression Switch)
For each MIDI channel, specify whether MIDI Expression messages
will be received (ON), or not (OFF). Assigning a check mark (✔) will
turn it on, and removing the check mark will turn it off.
Hold-1 (Receive Hold 1 Switch)
For each MIDI channel, specify whether MIDI Hold 1 messages will
be received (ON), or not (OFF). Assigning a check mark (✔) will turn
it on, and removing the check mark will turn it off.
Phase Lock (Phase Lock Switch)
Set Phase Lock to “✔” (ON) when you want to suppress
discrepancies in timing of parts played on the same MIDI channel.
When the Phase Lock parameter is set to “ON,” parts on the
same MIDI channel are put in a condition in which their timing
is matched, enabling them to be played at the same time.
Accordingly, a certain amount of time may elapse between
reception of the Note messages and playing of the sounds. Turn
this setting to “ON” only as needed.
Velocity Curve
Velocity Curve selects for each MIDI channel one of the four
following Velocity Curve types that best matches the touch of the
connected MIDI keyboard.
Value: 1–4
fig.Curve-4
2 1 3 4