Panasonic DP-1820E - Manuel (Page 10)

10
Getting To Know Your Machine
INV INV LTR LGL LDR
LTR
LDR
INV
LTR
LGL
INV
LTR
INV
INV-R LTR-R
LGL LDR
Width Guides
Face Down
Until it stops
Upper Limit Guides
Until it stops
Sheet Bypass
PUSH
Paper Tray
Max Level
Indicator
Paper Tray
∗ ∗∗ ∗∗ Hold the guides by the center when
adjusting the width
Operation Chart
If set in other
function mode
(DP-1820P/1820E
only)
Face Up
A B C
From
ADF/i-ADF
(Option)
From
Platen
Face Down
● If the original is not positioned
properly, a portion of the original
may not be copied.
● For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
or
● Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Load Paper: Face Up
Paper Weight: 16 - 24 lb
Paper Capacity: 550 Sheets (20 lb)
Adjust the width guides.
Incorrect adjustment may cause the
paper to wrinkle, misfed or skew.
Original Guides
■ Quick Operation Chart
NOTE:
When changing the paper size,
refer to page 54.
1
1 2 3
Adding Paper Turn the Power
Switch to the
ON position
Original Guides∗ ∗∗ ∗∗
Adjust to the
original's width
Tray
(Max. 50 Letter
size originals)
INV: Invoice, LTR: Letter
LGL: Legal, LDR: Ledger
4
4
Load Paper
(Do not exceed limit guides)
Paper Weight: 15-35 lb
Paper Capacity: 50 sheets/20 lb
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper and load them together onto the
tray.
NOTE:
Make sure that the paper is set
properly and that it does not exceed
the Max. Level indicator.
2
1 2 3