Installation, Television location, Optional cable connections – Panasonic CT-27XF36C Manuel d'utilisation

Page 5: Ac power supply cord, Cable/antenna connection, Cable / antenna connection

Advertising
background image

3

I

NSTALLATION

Installation

Television Location

This unit can be used as part of an entertainment center. Consult your dealer for available

options

.

r

Avoid excessive sunlight or bright lights, including reflections.

r

Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.

r

Fluorescent lighting may reduce remote control transmitting range.

r

Keep away from magnetic equipment, including motors, fans and external speakers.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:
r

Use 75-ohm coaxial shielded cables.

r

Use appropriate input and output connectors that match your component connectors.

r

Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
FOR SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC
ADAPTOR CONNECTOR MAY BE NECESSARY.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local cable company to ANT1
connection on back of television. Select cable mode and ANT1 in SET UP
menu under Prog Chan (Program Channels).

Note:

A cable converter box may be required for proper reception. Check with
your local cable company for compatibility requirements.

Antenna Connection

For proper reception of VHF/UHF channels, an external

antenna is required. For best reception, an outdoor
antenna is recommended.

Connect home antenna to ANT1 connection on back of

television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.

Polarized plug

Cable Preset

Cable Mode is preset at the factory.
Antenna users must change to TV mode and
ANT1 in the Set Up Menu under Prog Chan.

75 Ohm VHF/UHF

on back of TV

Incoming Cable from

Cable Company

Incoming Cable from

Home Antenna

Advertising
Ce manuel est liée aux produits suivants: