Panasonic AG- DVC 15P Manuel d'utilisation

Page 54

Advertising
background image

FRANÇAIS

ENGLISH

-54-

Lecture des sons enregistrés avec le repiquage
sonore

♦ Lorsqu’on règle l’élément [AUDIO-REC] du menu sur

[12bit] pour l’enregistrement original, les sons ajoutés
avec le repiquage sonore et les sons originaux seront
reproduits de la manière suivante, selon le réglage de
l’élément [AUDIO OUT] sur le menu du mode
magnétoscope (

m 63–66):

ST1:

Lecture du son original seulement.

ST2:

Lecture du son repiqué seulement.

MIX:

Lecture simultanée du son original et du son
ajouté avec le repiquage sonore.

Ne pas effectuer de repiquage sonore sur les

parties non enregistrées du ruban. Ceci risquerait
de déformer l’image et le son à la lecture.

¡ Si l’on remet le compteur de ruban à zéro au point où

l’on veut que le repiquage sonore finisse et qu’on met
la fonction arrêt mémoire (

m 81) en circuit, le

repiquage sonore s’arrêtera automatiquement lorsque
le ruban aura atteint ce point.

Playing Back the Sound Recorded with Audio
Dubbing

♦ If you set [AUDIO-REC] on the Menu to [12bit] for the

original recording, the sound added with audio dubbing
and the original sound are played back as follows
depending on the setting selected for [AUDIO OUT] on
the VCR Mode Menu (

m 63–66):

ST1:

The original sound alone is played back.

ST2:

The dubbed sound alone is played back.

MIX:

The original sound and the sound added with
audio dubbing are played back together.

Do not perform audio dubbing onto unrecorded

parts of the tape. This could cause the playback
picture and sound to be distorted.

¡ If you reset the Tape Counter to zero at the point where

you want the audio dubbing to end and turn on the
Memory Stop Function (

m 81), the audio dubbing

automatically stops when the tape reaches that point.

Advertising