Panasonic DMC-FS3 - Manuel (Page 47)

47 VQT1M97
Advanced (Recording pictures)
[REC] mode
½¾
Taking pictures that match the scene being
recorded
(½¾: Scene mode)
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Slide the [REC]/[PLAYBACK] selector switch to [¦/!], and then
press [MODE].
Press 3/4 to select [SCENE MODE1] or [SCENE MODE2], and then
press [MENU/SET].
• If you set the scene modes you use frequently in [SCENE MODE1] and
[SCENE MODE2], you can then select them immediately which is very convenient.
Press 3/4/2/1 to select the scene mode.
• You can switch menu screens from any menu item by rotating
the zoom lever.
Press [MENU/SET] to set.
• The menu screen is switched to the recording screen in the
selected scene mode.
∫ About the information
•
If you press [DISPLAY] when selecting a scene mode in step 3 ,
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
• To change the scene mode, press [MENU/SET] and then press 1, and return to step 3 above.
• Refer to P41 for information about the shutter speed.
• The scene mode flash setting is reset to the initial setting when the scene mode is changed.
• When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot be set in scene mode because the camera automatically adjusts
them to the optimal setting.
– [INTELLIGENT ISO]
– [SENSITIVITY]
– [COLOR MODE]
When taking pictures of people outdoors during the daytime, this mode allows you to
improve the appearance of the persons concerned and make their skin tones look
healthier.
* [PORTRAIT]
1
2
3
4
DMC-FS5&FS3_VQT1M97.book 47 ページ ２００７年１２月２６日 水曜日 午後１１時５９分