Taking pictures using auto bracket – Panasonic DMC-FS3 Manuel d'utilisation

Page 46

Advertising
background image

VQT1M97

46

Advanced (Recording pictures)

[REC] mode:

·½¾

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically recorded in the selected exposure compensation
range each time the shutter button is pressed. You can select the picture with the desired
exposure from the 3 pictures with different exposures.

With auto bracket

d1 EV

Note

When setting auto bracket, [

] appears on the screen.

When taking pictures using auto bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower
left of the screen.

The auto bracket setting is canceled if you turn the camera off or [POWER SAVE] is activated.

When auto bracket is set, the auto review function is activated regardless of the auto review
setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP]
menu.

The exposure may not be compensated with auto bracket depending on the brightness of the
subject.

[Œ] is set for the flash when auto bracket is set.

Burst is canceled when auto bracket is set.

1st picture

2nd picture

3rd picture

d0 EV

j1 EV

i1 EV

Press

3 [È] until [AUTO BRACKET] appears, set

the compensation range of the exposure with

2/1.

When you do not use auto bracket, select [OFF] (0).

Press [MENU/SET] to finish.

You can also press the shutter button halfway to finish.

1

2

DMC-FS5&FS3_VQT1M97.book 46 ページ 2007年12月26日 水曜日 午後11時59分

Advertising