Preparation, Charging the battery – Panasonic DMC-FS3 Manuel d'utilisation

Page 12

Advertising
background image

VQT1M97

12

Preparation

Preparation

Charging the Battery

Use the dedicated charger and battery.

The battery is not charged when the camera is shipped. Charge the battery before use.

Charge the battery with the charger indoors.

Charge the battery in a temperature between 10

oC to 35 oC (50 oF to 95 oF). (The battery

temperature should also be the same.)

When the [CHARGE] indicator flashes

The battery temperature is excessively high or low. The charging time will be longer than
normal. Also, charging may not be completed.

The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.

Note

After charging is completed, be sure to disconnect the power supply device from the electrical
outlet.

The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.

The battery will be exhausted if left for a long period of time after being charged.

The battery can be recharged even when it still has some charge left, but it is not
recommended that the battery charge be frequently topped up while the battery is fully
charged. (The battery has characteristics that will reduce its operating duration and cause the
battery to swell up.)

Attach the battery with
attention to the direction of the
battery.

Connect the charger to the
electrical outlet.

Charging starts when the [CHARGE]
indicator

A lights green.

Charging is complete when the
[CHARGE] indicator

A turns off (after

approx. 120 min maximum).

Detach the battery after
charging is completed.

1

2

3

DMC-FS5&FS3_VQT1M97.book 12 ページ 2007年12月26日 水曜日 午後11時59分

Advertising