Panasonic AJ-B95 - Manuel (Page 42)

The underlining indicates the factory setting.
511 VITC OUT
0000
0001
SBC
VAUX
This selects the method used to output the VITC which is
superimposed onto the output video signal.
0: During recording:
The input time code set by setup menu item No.570 (REGEN
SEL) or the TC generator switch is output as the VITC.
During playback:
The time code recorded in the SBC area is output as VITC.
1: During recording:
The time code detected from among the input video signals is
output as VITC.
During playback:
The time code recorded in the VAUX area is output as VITC.
<Note>
The time code detected from among the input video signals is
automatically output as VAUX when pictures are recorded.
[ [
509 DF MODE
0000
0001 DF
NDF
This selects the CTL and TCG drop frame mode.
0: For operation in the drop frame mode.
1: For operation in the non-drop frame mode.
<Note>
In the 625i mode, this setup menu item does not appear.
[ [
508 TCG CF FLAG
0000
0001 OFF
ON
This selects the color framing flag into the TCG.
0: The color framing flag is set to OFF.
1: The color framing flag is set to ON.
[ [
570 REGEN SEL
0000
0001
0002
0003 I-REG
E-VITC
E-LTC
VTR1TC
This selects whether the internal TCG or external time code is to
be used when the REGEN/PRESET switch has been set to the
REGEN position.
0: The internal TC is used in the regeneration mode.
1: The input video signal VITC is used in the regeneration mode.
2: The LTC in the TC input is used in the regeneration mode.
3: The sub-code TC is used in the regeneration mode when the
OPERATION MODE switch is set to INT.
<Note>
The VTR1 TC can be set only on the VTR2 side.
[ [
507 PHASE CORR This selects whether the phase correction for the LTC generated
by the TCG is to be controlled.
0: Phase correction is not controlled.
1: Phase correction is controlled.
[ [
506 BINARY GP
0000
0001
0002
0003
0004
0005
0006
0007
000
001
010
011
100
101
110
111
This selects the usage status of the user’s bit in the time code
generated by the TCG.
0: Not specified (character set is not specified).
1: ISO characters (8-bit character set complying with ISO646,
ISO2022)
2: Unassigned 1 (not defined)
3: Unassigned 2 (not defined)
4: Unassigned 3 (not defined)
5: Page/line
6: Unassigned 4 (not defined)
7: Unassigned 5 (not defined) [ [
0000
0001 OFF
ON
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
V
T
R
1
V
T
R
2
42
Setup menus
TIME CODE menu