Setup menus, Basic menu – Panasonic AJ-B95 Manuel d'utilisation

Page 32

Advertising
background image

[

[

[

The underlining indicates the factory setting.

001

LOCAL ENA

0000
0001

DIS

ST&EJ

This selects the switches which can be operated on the control
panel when the CONTROL switch has been set to the REMOTE
position.
0: None of the switches or buttons can be operated.
1: Only the STOP (ALL STOP) and EJECT buttons can be

operated.

003

REMAIN SEL

0000
0001

OFF

ON

This selects whether the REMAIN (remaining tape time) display is
to be superimposed on the MONITOR OUT connectors and liquid
crystal monitor screen.
0: REMAIN display is not shown.
1: REMAIN display is shown.
<Notes>

O

REMAIN display is not shown when the tape has been ejected
or when the remaining tape time is calculated after the tape has
been inserted.

O

It is not shown when TIME has been selected as the setup
menu item No.008 (DISPLAY SEL) setting.

O

It is not shown when tape start or tape end is detected and BOT
or EOT is displayed.

002

TAPE TIMER

0000
0001

±12h

24h

This selects the time system displayed on the CTL counter.
0: The time is displayed using the 12-hour time system.
1: The time is displayed using the 24-hour time system.

008

DISPLAY SEL

0000
0001
0002

TIME

T&STA

T&S&M

This selects what display is to be superimposed on the MONITOR
OUT connectors and liquid crystal monitor screen.
0: Counter value is displayed.
1: Counter value and operation mode are displayed.
2: In addition to the counter value and operation mode, the

remaining tape, tape format and error messages are displayed.

013

PB FORMAT

0000

0001

MANUAL

AUTO

This selects the format used for tape playback.
0: The format corresponds to what is selected as the setup menu

item No.012 (SYS FORMAT) setting.

1: The format corresponds to the format of the recording on the

tape.

<Notes>

O

Internal operation for VTR2 is forcibly set to MANUAL when an
editing mode has been selected.

O

The automatic 525i/625i setting is not performed.

[

[

[

[

070

TV SYSTEM

0000
0001

525
625

This selects the TV system.
0: The 525 interlace/59.94 Hz system is selected.
1: The 625 interlace/50 Hz system is selected.
<Note>
When this setting is changed, it is stored in the memory, and it
takes effect when the power is turned off and back on again.

[

011

CHARA TYPE

0000
0001

WHITE

W/OUT

This selects the type of characters to be used for the
superimposed display on the VIDEO MONI OUT connector and
for the setup menus.
0: White characters on a solid black background
1: White characters with black borders

[

[

[

[

[

012

SYS FORMAT

0000
0001

50M
25M

This selects the recording and playback format.
0: DVCPRO50 (50 Mbps) is selected.
1: DVCPRO25 (25 Mbps) is selected.

[

[

Item

Setting

No.

Superimposed

display

No.

Superimposed

display

Description of setting

V
T
R

1

V
T
R

2

32

Setup menus

BASIC menu

Advertising