Buzzer setting, User defined setting, Password lock setting – Panasonic WJ-HD500A Manuel d'utilisation

Page 73

Advertising
background image

73

Buzzer Setting

This item lets you enable or disable the buzzer sound
accompanying operation of the Disk Recorder’s buttons.

1. Move the cursor to the BUZZER parameter in the SYS-

TEM SETUP menu by pressing the D or C button.

2. Select either ON or OFF by pressing the + or - but-

ton.

ON:

Enables the buzzer.

OFF:

Disables the buzzer.

The factory default setting is ON.

User Defined Setting

This item lets you select either save or load the user
defined setting previously made in the setup menu.

1. Move the cursor to the USER DEFINED SETUP parame-

ter in the SYSTEM SETUP menu by pressing the D or
C button.

2. Select either mode by pressing the + or - button.

SAVE:

Saves the settings currently made as the user

defined settings.

LOAD:

Restores the settings to the user defined set-

tings previously saved.

The factory default setting is LOAD.

3. Press the

SET

button to display the selected mode

setup menu as shown below.

Password Lock Setting

The system setup and operations can be password protect-
ed to prevent a malfunction of the system due to accidental
erasure of data, alteration of settings or erroneous opera-
tions by unauthorized persons.
There are two passwords, defining the operational restric-
tions, as shown below.

ALL:

Both normal operations and setup operations are

allowed.

OPERATION:

Only normal operations are allowed.

Auto Button Locked Setting

This item lets you enable or disable the button lock function
automatically.

1. Move the cursor to the AUTO KEY LOCK parameter in

the SYSTEM SETUP menu by pressing the C or D but-
ton.

2. Select either ON or OFF by pressing the + or - but-

ton.

OFF:

No protection is applied until the LOCK button is

pressed.

ON:

Enables the button lock function automatically if no

operation takes place within about 5 minutes.

The factory default setting is OFF.

Password Setting

The items below let you determine the password for the
button lock function.

1. Move the cursor to PASSWORD ALL in the SYSTEM

SETUP menu by pressing the C or D button, then
press the

SET

button.

The cursor moves to the right editing area.

2. Select a 5-digit password in the editing area.

Select the first digit by pressing the + or - button.

3. Move the cursor to the right by pressing the B button,

then select a digit by pressing the + or - button.

4. Repeat the above steps 2 and 3 until the password is

completed.

5. When the password is completed, press the

SETUP/

ESC

button to return the cursor to ALL.

6. Similarly repeat the above steps 1 to 5 to set the pass-

word for OPERATION.

Note:

It is recommended to take a note of both pass-

words for password verification.

9-1 USER DEFINED SETUP

LOAD USER DEFINED SETUP

YES NO

[SET]:EXECUTE

9-2 USER DEFINED SETUP

SAVE USER DEFINED SETUP

YES NO

[SET]:EXECUTE

Advertising