Panasonic WJ-HD500A - Manuel (Page 47)

47
■ Playback Mode Setup
This item lets you select the playback mode according to
the recorded number when the PLAYBACK button is
pressed.
1. Move the cursor to the PLAYBACK MODE parameter in
the COMMON SETUP menu by pressing the D or C
button.
2. Select the desired mode to be played back by pressing
the + or - button.
ALL: All the records are played back with automatic
switching.
LOOP: Repeats playing back the selected number of
the recording.
ONE: Switches to standby mode for the next operation,
after the selected recording number has been
played back once.
The factory default setting is ALL.
■ Shuttle Speed Setup
This item lets you select the search speed for playing back
the recorded images when the Shuttle Ring is rotated to
maximum position.
1. Move the cursor to the SHUTTLE SPEED parameter in
the COMMON SETUP menu by pressing the D or C
button.
2. Select the desired playback mode by pressing the +
or - button.
LOW: Searches record at 5 times speed.
MID: Searches record at 50 times speed
HIGH: Searches record at 100 times speed.
The factory default setting is LOW.
■ Recording of the Title Display
This item lets you enable or disable recording of the cam-
era and group titles with the image on the Hard Disk.
1. Move the cursor to the TITLE EMBEDDED parameter in
the COMMON SETUP menu by pressing the D or C
button.
2. Select either ON or OFF by pressing the + or - but-
ton.
ON: Enables recording of the titles on the Hard Disk.
OFF: Disables recording of the titles on the Hard Disk.
The factory default setting is OFF.
■ Recording of the Clock Display
This item lets you enable or disable recording of the clock
(date and time) with the image on the Hard Disk.
1. Move the cursor to the TIME EMBEDDED parameter in
the COMMON SETUP menu by pressing the D or C
button.
2. Select either ON or OFF by pressing the + or - but-
ton.
ON: Enables recording of the clock on the Hard Disk.
OFF: Disables recording of the clock on the Hard Disk.
The factory default setting is OFF.
■ Thumbnail Display Setup
This item lets you select the maximum number of thumbnail
images displayed in the search window.
1. Move the cursor to the THUMBNAIL parameter in the
COMMON SETUP menu by pressing the D or C but-
ton.
2. Select either 8 or 16 by pressing the + or - button.
8: Displays a maximum of 8 thumbnail images.
16: Displays a maximum of 16 thumbnail images.
The factory default setting is 8.