Group setup – Panasonic WJ-HD500A Manuel d'utilisation
Page 46
46
●
Group Title Setup
This item lets you edit the group title to be displayed on the
monitor screen.
Each title is composed of 8 alphanumeric characters.
1. Move the cursor to TITLE in the COMMON SETUP menu
by pressing the D or C button, then press the
SET
but-
ton.
The GROUP SETUP (TITLE) menu as shown below
appears on the monitor screen.
2. Move the cursor to the group editing area to be edited
by pressing the D or C button.
3. Select a character by pressing the + or - button.
The characters shown below can be selected in
sequence.
Numeral:
0 1 2 3 4 5 6 7 8 9
Alphabet:
A to Z, a to z
Symbols:
← → = ? ' " # $ % & ( ) * + , – . / : ;
Space:
•
4. Press the B button to move the cursor to the right, then
select a character by pressing the + or - button.
5. Repeat the above steps 3 and 4 until all characters are
completed for the selected group title.
If a wrong character is selected, move the cursor to the
character to be replaced by pressing the A or B but-
ton, then select a new character by pressing the + or
- button.
6. Repeat the above steps 2 to 5 to edit other group titles.
7. When satisfied with all the group titles, press the
SETUP/ESC
button to return to the previous COMMON
SETUP menu.
ON:
Select this mode when the cameras are gen-
locked to the system.
OFF:
Select this mode when asynchronous cameras
are used in the system.
The default setting is OFF.
Note:
Confirm camera synchronization in the system.
The incorrect setting will cause improper recording.
■
Group Setup
As described before, the Disk Recorder activates the
recording function of the assigned cameras in four groups
when the TIMER is set to INT (internal).
These items let you determine the camera’s group for
recording.
●
Camera Assignment
1. Move the cursor to CAMERA ASSIGNMENT in the
COMMON SETUP menu by pressing the D or C but-
tons, then press the
SET
button.
The GROUP SETUP (CAMERA ASSIGNMENT) menu as
shown below appears on the monitor screen.
2. Move the cursor to the group editing area for the cam-
eras by pressing the A, B, D or C buttons.
3. Select a group number (
1
to
4
) to be assigned by
pressing the + or - button.
The factory default setting is 1.
4. Repeat the above step 2 and 3 to assign the group
number for other cameras.
5. When all camera assignments are completed, press the
SETUP/ESC
button to return to the previous COMMON
SETUP menu.
1-2 GROUP SETUP(TITLE)
GROUP1 G1••••••
GROUP2 G2••••••
GROUP3 G3••••••
GROUP4 G4••••••
1-1 GROUP SETUP(CAMERA ASSIGNMENT)
CAM GROUP CAM GROUP
1 1 9 1
2 1 10 1
3 1 11 1
4 1 12 1
5 1 13 1
6 1 14 1
7 1 15 1
8 1 16 1