Adding new sound on a recorded cassette – Panasonic AG-DVC15P Manuel d'utilisation

Page 53

Advertising
background image

FRANÇAIS

ENGLISH

-53-

2

1

OF

F –

POWER

ON

CAM

VCR

PAUSE/

PAUSE/

SEL

SEL

A.DUB

A.DUB

4

5

Ajout de nouveaux sons sur une
cassette enregistrée

(repiquage sonore)

Pour effectuer le repiquage sonore, il faut utiliser la
télécommande.
Le repiquage sonore permet d’ajouter de la musique ou
une narration au son enregistré initialement sur une
cassette.

Si l’on a réglé l’élément [AUDIO-REC] du menu sur

[16bit], la réalisation du repiquage sonore effacera
complètement les sons précédemment enregistrés.
Par conséquent, lorsqu’on veut effectuer un repiquage
sonore mais qu’on veut aussi conserver le son initial,
veiller à régler l’élément [AUDIO-REC] du menu sur
[12bit] avant d’effectuer l’enregistrement initial.

♦ Il n’est pas possible de réaliser un repiquage sonore

sur des enregistrements effectués en mode LP. (

m 16)

1

Insérer la cassette enregistrée et mettre
l’interrupteur [POWER] sur [ON].

2

Appuyer sur la touche [VCR/CAM] de
manière que le témoin [VCR] s’allume.

3

Au point à partir duquel on veut insérer
le nouveau son, faire passer le
caméscope au mode image fixe.

4

Appuyer sur la touche [A.DUB] de la
télécommande.

5

Appuyer sur la touche de pause [g] de
la télécommande pour enclencher le
repiquage sonore.

Arrêt du repiquage sonore

Appuyer sur la touche de pause [g] de la télécommande.
Le caméscope retournera au mode image fixe.

Adding New Sound on a Recorded
Cassette

(Audio Dubbing)

To perform audio dubbing, the Remote Controller is
necessary.
You can add music or narration on a recorded cassette.

If [AUDIO-REC] on the Menu has been set to [16bit],

performing audio dubbing will completely erase the
previously recorded sound.
Therefore, if you intend to perform audio dubbing but
also want to keep the original sound, be sure to set
[AUDIO-REC] on the Menu to [12bit] before making the
original recording.

♦ It is not possible to perform audio dubbing onto

recordings made in the LP Mode. (

m 16)

1

Insert the recorded cassette and set the
[POWER] Switch to [ON].

2

Press the [VCR/CAM] Button so that the
[VCR] Lamp lights.

3

At the point from which you want to
insert the new sound, switch the
Camera Recorder over to the Still
Playback Mode.

4

Press the [A.DUB] Button on the
Remote Controller.

5

Press the Pause Button [

G] on the

Remote Controller to start audio
dubbing.

Stopping Audio Dubbing

Press the Pause Button [

G] on the Remote Controller.

The Camera Recorder is again in the Still Playback
Mode.

Advertising
Ce manuel est liée aux produits suivants: