Care & cleaning, Daily maintenance clean with citric acid – Panasonic NC-HU301P Manuel d'utilisation

Page 20

Advertising
background image

20

Care & Cleaning

Care & Cleaning

Cautions

Before cleaning, be sure to disconnect the plug from outlet, dispense water and allow the

unit to cool .

Main unit and lid

Do not wet or soak the main unit in water.

If water enters the main unit from the bottom or from the dispensing

spout, it can get into the electrical components in the main unit

and may cause a malfunction.

Do not use detergents.

Do not use benzine or thinner.

(They may leave an odor.)

(They may damage the surface.)

Clean with a damp, well-wrung cloth.

Inner container

Do not use abrasives

such as polishing

powder, a scrub brush

or a nylon brush. They may damage the

fluororesin finish of the inner container.

Clean with a wet sponge.

Clean the inner container using

citric acid. (See P.21)

About "Scale"

While you are using this unit, minerals

contained in the water (like calcium) can get

stuck on the inner container or on the mesh

filter. This is called "scale", and it is harmless.

Milky-white gritty surface (caused by calcium)

White or glittering floating material

(crystals of minerals)

Discoloration in the finish like dark brown,

gray, or green areas

(metallic ion formed on the fluororesin covering)

This is not discoloration or corrosion of the

inner container itself, nor is it flakes from the

fluororesin covering.

Mesh filter

When filter is clogged, water does not flow

smoothly.

* After cleaning the filter,

be sure to reattach it

to the inner container.

Clean the filter with a brush.

Before storing the unit

Dry it thoroughly.

Put it into a plastic bag and seal the bag.

Daily

Maintenance

Clean with

Citric Acid

NC-HU401_301-EN-6.indd 20

11/12/08 2:35:55 PM

Advertising
Ce manuel est liée aux produits suivants: