Panasonic PT-DW100U - Manuel (Page 98)

98 – ENGLISH
How to use network functions (continued)
E-mail setup page (continued)
„
Select the conditions for sending E-mail to the
second E-mail address.
MAIL CONTENTS:
Select “NORMAL” or “SIMPLE”.
ERROR:
an error is detected by self-diagnosis.
LAMP1 RUNTIME:
remaining lamp service time has reached the
value set in the field.
LAMP2 RUNTIME:
remaining lamp service time has reached the
value set in the field.
LAMP3 RUNTIME:
remaining lamp service time has reached the
value set in the field.
LAMP4 RUNTIME:
remaining lamp service time has reached the
value set in the field.
INPUT AIR TEMPERATURE:
intake air temperature has reached the value
set in the field.
OUTPUT AIR TEMPERATURE:
exhaust temperature has reached the value
set in the field.
Enter the E-mail address to which the E-mail
is to be sent when two E-mail addresses are
going to be used. Do not enter it when the
second E-mail address is not going to be
used.
Check these boxes when E-mail is to be sent
periodically to the second E-mail address.
E-mail will be sent at the times and on the
days checked.
Button to update settings