82 – english, Load all user data, Initialize – Panasonic PT-DW100U Manuel d'utilisation

Page 82: Service password, Projector setup (continued), Press ▲▼ to select “load all 1. user data, Press enter. 2, Press ◄► to select “ok”, and 4. press enter, Press ▲▼ to select 1. “initialize, Press ◄► to select “ok”, and 5. press enter

Advertising
background image

82

ENGLISH

Projector setup (continued)

Load all user data

This loads various setting values that were saved as a
backup to the internal memory of the projector.

Press

▲▼ to select “LOAD ALL

1.

USER DATA”.

SAVE ALL USER DATA

LOAD ALL USER DATA

INITIALIZE

Press ENTER.

2.

The “SECURITY PASSWORD” screen will be

displayed.

SECURITY PASSWORD

Enter the password set for

3.

the security password of the
security menu.

A confirmation screen will appear.

ENTER

LOAD ALL USER DATA?

After data has been loaded,
power will turn off automatically.
Please wait for the fan to finish cooling
before you turn on the projector again.

CHANGE
EXECUTE

PROGRESS

OK

CANCEL

Press

◄► to select “OK”, and

4.

press ENTER.

Note

If this is executed, the projector enters a standby

state in order to reflect the setting values.

Initialize

This returns various setting values to their factory
default settings.

Press

▲▼ to select

1.

“INITIALIZE”.

LOAD ALL USER DATA

INITIALIZE

SERVICE PASSWORD

Press ENTER.

2.

The “SECURITY PASSWORD” screen will be

displayed.

SECURITY PASSWORD

Enter the password set for

3.

the security password of the
security menu.

The “INITIALIZE” screen will be displayed.

INITIALIZE

ALL USER DATA
ENTRY SIGNAL

NETWORK/E-MAIL

LOGO IMAGE

ALL USER DATA:

This is for use by service personnel. All
setting values including “ENTRY SIGNAL”,
“NETWORK/E-MAIL”, and “LOGO IMAGE”
are returned to their factory default values.
A restart will be required to complete the
initialization of ALL USER DATA.

ENTRY SIGNAL:

All setting values saved for each of the
input signals are cleared. To clear just some
registered signals, perform the procedure
described in “Clearing the data of registered
signals”. (p. 44)

NETWORK/E-MAIL:

This returns “NETWORK/E-MAIL” to its factory
default value.

LOGO IMAGE:

The settings for the images registered for
LOGO1 and LOGO2 are returned to their
factory default images. (p. 74)

Press

▲▼ to select the desired

4.

initialize item, and press ENTER.

A confirmation screen will appear.

ENTER

INITIALIZE NETWORK/E-MAIL?

CHANGE
SET

PROGRESS

OK

CANCEL

Press

◄► to select “OK”, and

5.

press ENTER.

Service password

This function is used by a service person.

Advertising