Panasonic PT-DW100U - Manuel (Page 39)

ENGLISH – 39
Basic Operation
Adjustment range after lens position (optical shift)
Do not move the lens beyond the bounds of the shift range as this may cause a change in the focus. This
limitation is to protect the parts of the projector.
Using the standard projection position as the reference, the optical axis shift function makes it possible to adjust
the projection position in the ranges shown in the figures below.
Model number of projection lens
Zoom Lens
ET-D75LE6
0.60V
0.20V
0.60V
0.20V 0.20V
0.20V
0.20H 0.20H
Standard
projection position
Projected screen
width, H
Pr
ojected
scr
een height, V
ET-D75LE1
ET-D75LE2
ET-D75LE3
ET-D75LE4
ET-D75LE8
0.70V
0.20V
0.70V
0.20V 0.20V
0.20V
0.3H 0.3H
Standard
projection position
Projected screen
width, H
Pr
ojected
scr
een height, V
Note
The ET-D75LE5 has a fixed focal point, and so shift adjustment cannot be carried out. •
Moving the projection lens position to the home position
Press and hold LENS on the projector’s controls or SHIFT on the remote 1.
control for 3 seconds or more.
LENS
SHIFT
EXECUTE
CANCEL
ENTER
MENU
Press ENTER while the menu shown above is being displayed. (It will be 2.
displayed for about 5 seconds.)
“PROGRESS...” will appear in the menu, and the projection lens will move to the home position. •
Note
The home position for the projection lens is the lens position when the lens is being replaced or when the •
projector is being stored away, and it is not the optical center of the screen.