English – 31 – Panasonic PT-DW100U Manuel d'utilisation

Page 31

Advertising
background image

ENGLISH – 31

Getting Started

Connecting the signal to the SD-SDI input module

SD-SDI Module
ET-MD77SD1

IN

SERIAL

OUT

LAN

SD-SDI input module (optional)
ET-MD77SD1 (for 480i/576i)

SD-SDI signal

SD-SDI signal output

(active through)

LAN terminal

*1

(10BASE-T/100BASE-TX)

Professional

Digital VCR

Note

If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this

happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being
input.

You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 56-57)

*1: The LAN terminal present on the optional input module cannot be used. Use the LAN terminal that is provided

as standard with the projector.

Connecting the signal to the HD/SD-SDI input module

HD/SD-SDI input module (optional)
ET-MD77SD3 (for HD/SD)

Professional

Digital VCR

HD/SD-SDI
Module
ET-MD77SD3

IN

SERIAL

OUT

LAN

HD-SDI or SD-SDI

signal output

(active through)

LAN terminal

*1

(10BASE-T/100BASE-TX)

HD-SDI or SD-SDI

signal

Note

You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 56-57)

If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this

happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being
input.

To ensure full imaging performance, use a connecting cable with the specifications of Canare 5CFB or higher, or

of Belden1694A or higher.
(For example: Canare 5CFB, 5CFTX, 7CFB, Belden1694A, etc.)

*1: The LAN terminal present on the optional input module cannot be used. Use the LAN terminal that is provided

as standard with the projector.

Advertising