Panasonic PT-DW100U - Manuel (Page 26)

26 – ENGLISH
Connection (continued)
Example of connecting with VIDEO devices
IN OUT RS-232C IN RS-422 IN RS-422 OUT
SERIAL REMOTE 1 REMOTE 2 IN
OUT
IN
SYNC/HD VD
B/P B G/Y R/P R
S-VIDEO IN VIDEO RGB 2 IN DVI-D IN RGB 1 IN
LAN
Video deck (TBC built-in)
Control PC Control PC
Color monitor Video deck (TBC built-in) DVD player
Red (connected to P
R
terminal)
Blue (connected to P
B
terminal)
Green (connected to Y terminal)
DVD player with HDMI
(HDCP) terminal
Control PC
Attention
When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a •
TBC between the projector and the video deck.
If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC •
between the projector and the video deck.
Note
The DVI-D signal input terminal supports only a single link. •
The HDMI-DVI-D conversion cable is required to connect an HDMI-compliant device. •
When using the DVI-D input, EDID settings may be required for the connected device. (pp. 71, 72) •
It is possible to connect the DVI-D input terminal with an HDMI- or DVI-D-compliant device, but with some •
devices the images may not appear or other problems may be encountered in operation.