14 – english, Projector main unit, Rear – Panasonic PT-DW100U Manuel d'utilisation

Page 14

Advertising
background image

14

ENGLISH

Location and function of each part (continued)

Front

„

Projector Main Unit

Rear

„

1 Projection lens cover

(p. 34)

2 Projection lens (optional)

Lens for projecting images on the screen.

3 Remote control receiver window (front)

(p. 17)

This window receives the signal beam emitted
from the remote control.

4 LAMP (LAMP1, LAMP2, LAMP3, LAMP4)

monitor

(p. 109)

These LEDS indicate the status of each lamp -
GREEN for “In Use”, RED for “End-of-Life”, and
BLINKING RED for “Error Condition”.

5 Temperature monitor (TEMP)

(p. 109)

These LEDs illuminate and flash to indicate lamp
warmup intervals, abnormal internal temperatures,
or cooling fan errors.

6 Power indicator lamp

(p. 35)

The lamp lights in red when the MAIN POWER
switch is turned to “ l ”. It turns to green when the
POWER ON button of the remote control or the
main unit is pressed.

7 Air intake vents

During installation, ensure adequate airflow to
these vents.

8 Burglar hook

Attach a commercial burglar prevention cable to
this hook port.

9 Adjustable feet

(p. 20)

Use these feet to adjust the tilt of the projector.
(Adjustable feet are provided at the front and rear,
right and left.)

j Projection lens cover lock button

(p. 34)

Press these side buttons to unlock the lens
cowling, pulling it forward to remove. Centering
the lens first may ease removal.

k Air filter

(p. 110)

l Air filter cleaning monitor

(pp. 79, 110)

This blinks blue while the air filter is being cleaned.
It lights red when there is a problem with the air
filter.

m Filter cleaning unit fixing screw

(p. 110)

This is used to secure the air filter cover.

n Air exhaust vents

Hot air comes out of the air exhaust vents.

o Lamp unit cover screw

(p. 113)

This is used to secure the lamp unit cover.

p Remote control receiver window (rear) (p. 17)

This also receives the signal beam coming from
the remote control.

q Remote control receiver window (bottom)

(p. 17)

This also receives the signal beam coming from
the remote control.

r Air intake vents

During installation, ensure adequate airflow to
these vents.

s Lamp unit cover

(p. 113)

This hinged panel swings down for lamp
replacement.

1 2

3 4 5 6

7

n

8 9 j

k

l m

o

p

q

r

s

Advertising