91 special features, English – Panasonic PT DW10000U Manuel d'utilisation

Page 91

Advertising
background image

ENGLISH –

91

Special Features

E-mail setup page

With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can
be sent to one or more preset e-mail addresses (maximum two addresses). Click [Projector Control], then
[E-mail set up] to display the E-mail setup page.

Select “Enable” to use the E-mail
function.

Enter the IP address or server name
of the E-mail server (SMTP). The
DNS server must be set if the server
name is entered.

Enter the E-mail address of the
projector.
(maximum 63 characters)

The user can modify the minimum
time interval of temperature warning
mail. The default value is 60 minutes.
In this case, the user cannot send
another mail for 60 minutes after
sending previous temperature warning
mail even the set warning temperature
is reached again.

The user can enter the location of,
for example, the installed projector so
that the recipient may easily identify
the originator of the E-mail. (maximum
63 characters)

The user can modify the threshold
temperature for sending temperature
warning mail. If the temperature rises
above the set value, control sends
temperature warning mail.

Enter the E-mail address of your
desired recipient.

Select “Enable” to use the E-mail
function.

Enter the IP address or server name
of the E-mail server (SMTP). The
DNS server must be set if the server
name is entered.

Enter the E-mail address of the
projector.
(maximum 63 characters)

The user can modify the minimum
time interval of temperature warning
mail. The default value is 60 minutes.
In this case, the user cannot send
another mail for 60 minutes after
sending previous temperature warning
mail even the set warning temperature
is reached again.

The user can enter the location of,
for example, the installed projector so
that the recipient may easily identify
the originator of the E-mail. (maximum
63 characters)

The user can modify the threshold
temperature for sending temperature
warning mail. If the temperature rises
above the set value, control sends
temperature warning mail.

Enter the E-mail address of your
desired recipient.

Select the conditions for sending E-mail.
MAIL CONTENTS:
Select “NORMAL” or “SIMPLE”.
ERROR:
an error is detected by self-diagnosis.
LAMP1 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP2 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP3 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP4 RUNTIME:
remaining lamp service time has
reached the value set in the field.
INPUT AIR TEMPERATURE:
intake air temperature has reached the
value set in the field.
OUTPUT AIR TEMPERATURE:
exhaust temperature has reached the
value set in the field.

Select the conditions for sending E-mail.
MAIL CONTENTS:
Select “NORMAL” or “SIMPLE”.
ERROR:
an error is detected by self-diagnosis.
LAMP1 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP2 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP3 RUNTIME:
remaining lamp service time has
reached the value set in the field.
LAMP4 RUNTIME:
remaining lamp service time has
reached the value set in the field.
INPUT AIR TEMPERATURE:
intake air temperature has reached the
value set in the field.
OUTPUT AIR TEMPERATURE:
exhaust temperature has reached the
value set in the field.

Advertising