English, Error information page, How to use network function (continued) – Panasonic PT DW10000U Manuel d'utilisation

Page 90: When [failed] has appeared for an item

Advertising
background image

90

– ENGLISH

Error information page

When

is displayed on the status information screen, click it to display the error

details.

Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.

When [FAILED] has appeared for an item

OK: Normal operation
FAILED: Occurrence of trouble

OK: Normal operation
FAILED: Occurrence of trouble

Parameter

Description

MAIN CPU BUS

Trouble has occurred in the microcomputer circuitry. Consult your dealer.

FAN

Trouble has occurred in the fan or its drive circuit. Consult your dealer.

OPTICS MODULE TEMPERATURE

The temperature inside the projector is high. It may be that the projector is being

used where the ambient temperature is high such as near a heating appliance.

INPUT AIR TEMPERATURE

The input air temperature is too high. It may be that the projector is being used

where the ambient temperature is high such as near a heating appliance.

OUTPUT AIR TEMPERATURE

The temperature around the lamp is too high. It may be that the projector’s

ventilation holes are blocked.

LAMP REMAIN TIME

The lamp runtime has exceeded the prescribed cumulative time, and it is now

time to replace the lamp.

LAMP STATUS

The lamp has failed to light.

Wait a short while for the lamp to cool off, and then turn on the power.

APERTURE

(CONTRAST-SHUTTER)

Trouble has occurred in the contrast shutter circuitry. Consult your dealer.

SHUTTER

(MUTE-SHUTTER

Trouble has occurred in the shutter circuitry. Consult your dealer.

DIRTY AIR FILTER

The air filter is blocked with dust.

Turn off the MAIN POWER switch by following the procedure on page 36, and

then clean the air filter. (pp. 108, 109)

AIR FILTER CLEANER UNIT

The air filter unit is not installed. Install the air filter unit.

OPTICS MODULE TEMP. SENSOR

Trouble has occurred in the temperature detection sensor inside the projector.

Consult your dealer.

INPUT AIR TEMP. SENSOR

Trouble has occurred in the sensor used to detect the input air temperature.

Consult your dealer.

OUTPUT TEMP. SENSOR

Trouble has occurred in the sensor used to detect the exhaust air temperature.

Consult your dealer.

BATTERY

The backup battery has been run out. Consult your dealer.

AIRFLOW SENSOR

Problem with air flow sensor. Consult your dealer.

AC POWER

AC power supply voltage input has dropped. Check that there is sufficient

electrical wiring capacity for the projector’s power consumption requirements.

LENS SHIFT

Problem with lens shift circuit. Consult your dealer.

Parameter

Description

MAIN CPU BUS

Trouble has occurred in the microcomputer circuitry. Consult your dealer.

FAN

Trouble has occurred in the fan or its drive circuit. Consult your dealer.

OPTICS MODULE TEMPERATURE

The temperature inside the projector is high. It may be that the projector is being

used where the ambient temperature is high such as near a heating appliance.

INPUT AIR TEMPERATURE

The input air temperature is too high. It may be that the projector is being used

where the ambient temperature is high such as near a heating appliance.

OUTPUT AIR TEMPERATURE

The temperature around the lamp is too high. It may be that the projector’s

ventilation holes are blocked.

LAMP REMAIN TIME

The lamp runtime has exceeded the prescribed cumulative time, and it is now

time to replace the lamp.

LAMP STATUS

The lamp has failed to light.

Wait a short while for the lamp to cool off, and then turn on the power.

APERTURE

(CONTRAST-SHUTTER)

Trouble has occurred in the contrast shutter circuitry. Consult your dealer.

SHUTTER

(MUTE-SHUTTER

Trouble has occurred in the shutter circuitry. Consult your dealer.

DIRTY AIR FILTER

The air filter is blocked with dust.

Turn off the MAIN POWER switch by following the procedure on page 36, and

then clean the air filter. (pp. 108, 109)

AIR FILTER CLEANER UNIT

The air filter unit is not installed. Install the air filter unit.

OPTICS MODULE TEMP. SENSOR

Trouble has occurred in the temperature detection sensor inside the projector.

Consult your dealer.

INPUT AIR TEMP. SENSOR

Trouble has occurred in the sensor used to detect the input air temperature.

Consult your dealer.

OUTPUT TEMP. SENSOR

Trouble has occurred in the sensor used to detect the exhaust air temperature.

Consult your dealer.

BATTERY

The backup battery has been run out. Consult your dealer.

AIRFLOW SENSOR

Problem with air flow sensor. Consult your dealer.

AC POWER

AC power supply voltage input has dropped. Check that there is sufficient

electrical wiring capacity for the projector’s power consumption requirements.

LENS SHIFT

Problem with lens shift circuit. Consult your dealer.

How to use network function (continued)

Advertising