Panasonic PT DW10000U - Manuel (Page 86)

86 – ENGLISH
Network connections
The projector is equipped with network functions, and web browser controls can be used to carry out the following
operations from a computer.
Projector settings and adjustments
Projector status display
Transmission of E-mail messages if there is a problem with the projector
Note
A LAN cable is required to use the network function.
Name and function of network function parts
Attention
If the LAN terminal is touched by electrostatically charged hands (or body), failure may be caused by the
discharge of static electricity.
Be careful not to touch metallic part of LAN terminal or LAN cable.
•
•
•
•
■
•
PC
Projector
LAN cable (straight) LAN cable (straight)
PC
Projector
LAN cable (straight) LAN cable (straight)
A Web browser is required to use this function. Make sure that a Web browser is available in the system.
Use Microsoft Windows 98SE/Me/NT4.0/2000/XP for the OS of your personal computer.
The Web browser should be Internet Explorer 6.0 or later or Netscape Communicator 7.0 or later.
To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail
feature is available in your system.
Use a straight insulated LAN cable which supports category 5 or above.
The length of LAN cable must be 100 m or shorter.
•
•
•
•
•
•
A Web browser is required to use this function. Make sure that a Web browser is available in the system.
Use Microsoft Windows 98SE/Me/NT4.0/2000/XP for the OS of your personal computer.
The Web browser should be Internet Explorer 6.0 or later or Netscape Communicator 7.0 or later.
To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail
feature is available in your system.
Use a straight insulated LAN cable which supports category 5 or above.
The length of LAN cable must be 100 m or shorter.
•
•
•
•
•
•
LAN terminal (10BASE-T/100BASE-TX)
Connect LAN cable here.
LAN10/100 lamp (yellow)
This lights when a 100BASE-TX connection
is established.
LAN LINK/ACT lamp (green)
This lights when a LAN cable is connected
and flashes when signals are being received
or sent.
IN OUT RS-232C IN RS-422 IN RS-422 OUT
SERIAL REMOTE 1 REMOTE 2 IN
OUT
IN
SYNC/HD VD
B/P B G/Y R/P R
S-VIDEO IN VIDEO RGB 2 IN DVI-D IN RGB 1 IN
LAN
LAN terminal (10BASE-T/100BASE-TX)
Connect LAN cable here.
LAN10/100 lamp (yellow)
This lights when a 100BASE-TX connection
is established.
LAN LINK/ACT lamp (green)
This lights when a LAN cable is connected
and flashes when signals are being received
or sent.
IN OUT RS-232C IN RS-422 IN RS-422 OUT
SERIAL REMOTE 1 REMOTE 2 IN
OUT
IN
SYNC/HD VD
B/P B G/Y R/P R
S-VIDEO IN VIDEO RGB 2 IN DVI-D IN RGB 1 IN
LAN
How to use network function (continued)