Panasonic PT DW10000U - Manuel (Page 76)

76 – ENGLISH
Option2 settings (continued)
Installation Setting
A projection scheme can be chosen depending on
the installation of the projector. If the picture is shown
upside down or in reverse, change the projection
scheme.
Select the setting by displaying the on-screen
indications using buttons of the remote control or the
control panel on the main unit.
1. Press
▲▼ to select
“INSTALLATION”.
2. Press
◄► to switch
“INSTALLATION”.
The setting will change as follows each time
◄► is pressed.
FRONT-F FRONT-C
REAR-C REAR-F
•
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
Floor mount front projection
(FRONT-F)
Ceiling mount front projection
(FRONT-C)
Floor mount front projection
(FRONT-F)
Ceiling mount front projection
(FRONT-C)
3. Press MENU twice.
The on-screen indications disappear and the
normal screen appears again.
Altitude
When using the projector over 1 400 m above sea
level, set to “HIGH”.
1. Press
▲▼ to select “ALTITUDE”.
2. Press ◄► to switch
“ALTITUDE”.
The setting will change as follows each time
◄► is pressed.
LOW HIGH
•
•
Floor mount rear projection
(REAR-F)
Ceiling mount rear projection
(REAR-C)
Floor mount rear projection
(REAR-F)
Ceiling mount rear projection
(REAR-C)
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1