Panasonic PT DW10000U - Manuel (Page 70)

70 – ENGLISH
Auto signal
When unregistered signals are to be input frequently
because the unit is used at conferences or other
venues, the screen display position can be adjusted
automatically without having to press AUTO SETUP
on the remote control each time.
1. Press
▲▼ to select “AUTO
SIGNAL”.
2. Press
◄► to switch “AUTO
SIGNAL”.
The setting will change as follows each time
◄► is pressed.
OFF ON
If unregistered signals are input when “ON”
is selected, auto setup will be initiated
automatically.
Automatic adjustment
(Only RGB input)
Use this setting when adjusting a specific or oblong
(16:9, etc.) signal.
1. Press
▲▼ to select “AUTO
SETUP”.
•
•
OPTION1
COLOR MATCHING
LARGE SCREEN CORRECTION
AUTO SIGNAL
AUTO SETUP
BACK COLOR
DVI EDID
AUX DVI EDID
P IN P
FUNC1
OSD POSITION
OSD MEMORY
MENU SELECT
CHANGE
OFF
OFF
OFF
BLUE
EDID2(PC)
EDID2(PC)
OFF
P IN P
2
ON
OPTION1
COLOR MATCHING
LARGE SCREEN CORRECTION
AUTO SIGNAL
AUTO SETUP
BACK COLOR
DVI EDID
AUX DVI EDID
P IN P
FUNC1
OSD POSITION
OSD MEMORY
MENU SELECT
CHANGE
OFF
OFF
OFF
BLUE
EDID2(PC)
EDID2(PC)
OFF
P IN P
2
ON
OPTION1
COLOR MATCHING
LARGE SCREEN CORRECTION
AUTO SIGNAL
AUTO SETUP
BACK COLOR
DVI EDID
AUX DVI EDID
P IN P
FUNC1
OSD POSITION
OSD MEMORY
MENU SELECT
SUB MENU
OFF
OFF
OFF
BLUE
EDID2(PC)
EDID2(PC)
OFF
P IN P
2
ON
ENTER
OPTION1
COLOR MATCHING
LARGE SCREEN CORRECTION
AUTO SIGNAL
AUTO SETUP
BACK COLOR
DVI EDID
AUX DVI EDID
P IN P
FUNC1
OSD POSITION
OSD MEMORY
MENU SELECT
SUB MENU
OFF
OFF
OFF
BLUE
EDID2(PC)
EDID2(PC)
OFF
P IN P
2
ON
ENTER
Option1 settings (continued)
2. Press ENTER.
The “AUTO SETUP” screen will be displayed.
3. Press
◄► to switch “MODE”.
The setting will change as follows each time
◄► is pressed.
DEFAULT WIDE USER
DEFAULT:
to receive signals of which image aspect is
4:3 or 5:4 (applicable resolution : 640 Ч 400,
640 Ч 480, 800 Ч 600, 832 Ч 624, 960 Ч 720,
1 024 Ч 768, 1 152 Ч 864, 1 152 Ч 870,
1 280 Ч 960, 1 280 Ч 1 024, 1 600 Ч 1 200,
1 400 Ч 1 050
WIDE:
to receive signals of which image aspect is 16:9
(oblong) (applicable resolution : 720 Ч 400,
1 280 Ч 720, 1 280 Ч 800, 1 280 Ч 768,
1 376 Ч 768, 1 600 Ч 1 024)
USER:
to receive signals of specific horizontal
resolution (number of horizontally displayed
dots)
4. If “User” is selected, press
◄►
to enter the horizontal resolution
of signal source into “DISPLAY
DOTS”.
5. Press ENTER.
Execute automatic adjustment. A message
“PROGRESS...” appears during automatic
adjustment. When the adjustment is complete,
the system returns to the input screen.
•
•
•
•
•
•
ENTER
AUTO SETUP
MODE
CHANGE
EXECUTE
DEFAULT
ENTER
AUTO SETUP
MODE
CHANGE
EXECUTE
DEFAULT