Panasonic PT DW10000U - Manuel (Page 33)

ENGLISH – 33
Getting Started
How to install and remove the projection lens (optional)
Adjust the lens shift position so that it is at the home
position (p. 38) before installing or removing the
projection lens.
Note
Remove the dustproof sponge from the lens fitting
of the projector before installing the projection lens.
(Keep the dust-proof sponge in a safe place for later
use if needed.)
After removing the projection lens, install the
dust-proof sponge to the lens fitting of the projector
in order to stop dust from getting inside the
projector.
How to install the
projection lens
1. While pressing the projection
lens cover lock button, pull the
cover forward to remove it.
2. Align the mark (orange) on the
projection lens with the mark on
the projector (
), and then insert
the lens and turn it clockwise
until it clicks into place.
•
•
FILTER
CLEANING
OPEN
CLOSE
Projection lens cover lock button
FILTER
CLEANING
OPEN
CLOSE
Projection lens cover lock button
Mark (orange) Mark (orange)
3. Push the projection lens cover in
until it clicks into place.
How to remove the
projection lens
1. While pressing the projection
lens cover lock button, pull the
cover forward to remove it.
2. While holding down the
projection lens lock button,
turn the projection lens counter
clockwise, and then pull it off.
FILTER
CLEANING
OPEN
CLOSE
Projection lens cover lock button
FILTER
CLEANING
OPEN
CLOSE
Projection lens cover lock button
Projection lens lock button Projection lens lock button