117 information, English – Panasonic PT DW10000U Manuel d'utilisation

Page 117

Advertising
background image

ENGLISH –

117

Information

Model No.

PT-D10000U

PT-DW10000U

Interface

ports

RGB2 input
terminal

1 set of high-density, D-sub 15p (female)
[For YP

B

P

R

input]

Y: 1.0 V [p-p] synchronization signal included, P

B

P

R

: 0.7 V [p-p] 75

Ω

[For RGB input]

0.7 V [p-p] 75

Ω For G-SYNC: 1.0 V [p-p] 75 Ω

HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted

HD/SYNC, and VD terminals are not compliant with 3-value direct SYNC.

Video input/
output terminal

1 set BNC

1.0 V [p-p] 75

Ω (Active through for Video output)

S-video input
terminal

1 set Mini DIN 4p

Y 1.0 V [p-p] C 0.286 V [p-p] 75

Ω Compliant with S1 signals

DVI-D input
terminal

1 set

DVI 1.0 compliant

HDCP (Single link only) compatible

LAN terminal

1 set (Used for network connection)

10BASE-T/100BASE-TX

PJLink™ compatible

Serial input/
output terminal

D-sub 9-pin (female/male), RS-232C compliant

Used for personal computer control

Remote1 input/
output terminal

1 set each for M3 pin jack

Wired remote control, used for link control

Remote2 terminal

D-sub 9p (female)

Used for external control

Length of power supply cord

3.0 m (9.1´)

Cabinet

Molded resin

Outside dimensions

Width: 578 mm (22.8˝), Height : 320 mm (12.6˝), Depth: 643 mm (25.3˝)

Working environment
condition

32 kg (71 lb) (without lens)

Working environment
condition

Ambient temperature

*3

: 0 °C to 45 °C

Ambient humidity: 10 % to 80 % (no condensation)

Remote

control

Power source

3 V DC (two AA dry cells)

Operation range

approx. 30 m (98´5˝) (in front of beam receiver)

Mass

134 g (0.31 lb) (including dry cells)

Outside
dimensions

Width: 51 mm (2˝), Thickness: 23 mm (0.9˝), Depth: 176 mm (6.9˝)

Option

Hanging attachment (For high ceiling): ET-PKD100H
Hanging attachment (For low ceiling): ET-PKD100S
Projection lens:

ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4,

ET-D75LE5, ET-D75LE6, ET-D75LE8

DVI-D input module:

ET-MD77DV

SD-SDI input module:

ET-MD77SD1

HD/SD-SDI input module:

ET-MD77SD3

Replacement Lamp Unit:

ET-LAD10000 (single bulb),

ET-LAD1000F (4 bulbs)

*1 Interlace signals are not supported even when the EDID2 mode is selected.
*2 70˝ – 300˝ for ET-D75LE5
*3 If using the projector at high altitudes (1 400 m (4605.3´) - 2 700 m (8881.5´)), the ambient operating

temperature should be 0°-40°C.

Advertising