Panasonic AG-DTL1 - Manuel (Page 58)

58
[STX] POF [ETX] [STX] POF [ETX] Sets the POWER switch to OFF.
[STX] PON [ETX] [STX] PON [ETX] Sets the POWER switch to ON.
RS-232C
O
Power control commands
Data transmitted by PC Data returned from unit in response Description of command
O
Search control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] SCP:data [ETX] [STX] SCP [ETX] Performs counter value search and performs playback.
[STX] SCS:data [ETX] [STX] SCS [ETX]
Performs counter value search and establishes the STILL
mode.
[STX] SAS:data [ETX] [STX] SAS [ETX]
Performs alarm number search and establishes the STILL
mode.
[STX] SPT:data [ETX] [STX] SPT [ETX]
Performs playback as far as the designated position (same
as the OPT command).
[STX] STS:data [ETX] [STX] STS [ETX]
Performs a date and time search and establishes the STILL
mode.
O
Timer control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] TAT:data [ETX] [STX] TAT [ETX]
Sets the time to be set when signals have been input from
the component connected to TIME ADJ IN on the rear panel
terminal section.
[STX] TCS:data [ETX] [STX] TCS [ETX] Sets the current date.
[STX] TTS:data [ETX] [STX] TTS [ETX] Sets the current time.
O
Video control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] VMD:m [ETX] [STX] VMD [ETX] Sets the color of the video output signals.
[STX] VNR:m [ETX] [STX] VNR [ETX]
Sets the video signals to be output to the monitor screen at
all times except when the unit is in the recording mode.
[STX] VVC [ETX] [STX] VVC [ETX] Detects whether video signals are input.