Panasonic AG-DTL1 - Manuel (Page 11)

11
Performing initial settings
1
Set the power switch to ON.
2
Set the PROGRAM switch to the MENU position.
The setting menu screen is shown on the TV
monitor.
4
Proceed as follows to set the date and time.
O
Use the (4) and (3) SHIFT buttons to move the
flashing part to the item whose setting is to be
changed.
O
Use the (2) and (1) SHIFT buttons to move the
flashing part to the column where the setting is
to be changed.
O
Press the (+) or (–) SET button to adjust the
figures.
3
Press the PAGE (+) or PAGE (–) button to display
the P1 TIME/DATE PRESET screen.
The flashing items are ones that can be set.
5
Upon completion of the settings, set the
PROGRAM switch to the OFF position.
The setting menu screen is cleared from the TV
monitor, and the normal mode is restored.
$ Setting the date and time
Before operating the unit, perform the following initial
settings.
<
2 1
2 1
6 5
∫ ; 3 4
3 4
3 4
H H
1 2•5 3 4
P1
[TIME/DATE PRESET]
2000- 1-01 SAT
00:00:00
[REC LOCK]
MODE OFF
[HOUR METER]
00000h