Panasonic CF-07 - Manuel (Page 38)

38
T
roubleshooting
Reinstalling Software
9
At the confirmation message , press Y .
The computer will reboot, and the operation of reinstallation for the hard disk starts
automatically.
Windows 2000
When [Insert media 2] is displayed, insert Product Recovery CD-ROM 2 into the
CD-ROM drive and immediately select [OK].
10
After the reinstallation procedure completes, the following message will appear on
the display. Remove the Product Recovery CD-ROM
*
and FIRSTAID FD, then re-
start the computer by pressing
(When using the USB floppy disk drive, disconnect it.)
All data on the whole HDD has been restored to the factory default.
After removing floppy disk and the Product Recovery CD-ROM,
restart the computer and set up Windows again.
Windows 98
If [OK] is not immediately selected:
[The media does not contain the correct file] may be displayed. In such cases,
[Insert media 2...] is displayed again when [OK] is selected. Confirm that Product
Recovery CD-ROM 2 has been inserted by opening the tray of the CD-ROM
drive, then close the tray and immediately select [OK].
NOTE
Windows2000 install wizard will start after reboot.
Restore process will execute more after Windows2000 install wizard.
Restart the computer after removing Product Recovery CD-ROM.
Windows 2000
Ctrl
+ Alt + Del .
*
Windows 2000 : Product Recovery CD-ROM2