Panasonic CF-07 - Manuel (Page 37)

37
T
roubleshooting
In such cases, the initial partition size must be 2 GB or more of the hard
disk size. Reinstallation cannot be performed with a small partition size.
If [The program has detected an error 110 on the partition starting at sector
xxxxxxxx on disk1.] is displayed, select [Yes].
NOTE
8
Make a selection from the menu.
To restore all contents of the hard disk to factory default, including the partition
setting(s):
Select [1. Restore the whole HDD to factory default].
Windows 98
To restore the hard disk (C drive) to factory default, excluding the partition
setting(s):
Select [2. Restore the drive C to factory default].
Windows 2000
To reinstall Windows Windows 2000 to the first partition to factory default:
Select [2. Restore Windows 2000 to the first partition].
-------------------------------------------------
Select a number
------------------------------------------------- 1.
Restore the whole HDD to factory default
2. Restore the drive C to factory default
3. End
-------------------------------------------------
-------------------------------------------------
Select a number
------------------------------------------------- 1.
Restore the whole HDD to factory default
2. Restore Windows 2000 to the first partition
3. End
-------------------------------------------------
Windows 98
6
Press F10 .
At the confirmation message, select [Yes] and press Enter . The computer will
reboot, and the License Agreement screen should appear. Select [1. Yes, I agree to the
provisions above and wish to continue!].
7
This screen should appear.
(To next page)
Windows 2000