Panasonic CF-07 - Manuel (Page 13)

13
Getting Started
4
Insert the two battery packs
CAUTION
2 Slide the latch down, and then without releasing it,
open the cover as illustrated.
3 Firmly attach the battery pack to the connector as
illustrated.
4 Close the cover, then lock it by sliding the latch to
the left.
3
Read the LIMITED USE LICENSE AGREEMENT ( page 40)
Before removing the seal covering the power switch, read the LIMITED USE LI-
CENSE AGREEMENT.
Main Battery Pack Slot Second Battery Pack Slot
1 Turn over the computer, then unlock the cover by
sliding the latch to the right.
Be sure to insert the battery pack as illustrated.
Be sure the battery pack is properly connected to the connector.
For an improperly attached cover, your battery pack may fall out while you are
carrying around your computer.
Be sure the tab does not get caught when closing the cover.
1
Bottom
Latch
3
2
Battery Pack Tab
4
Cover
5
Open the cover of the expansion bus
connector, then connect your com-
puter to a port replicator
3
1
Expansion Bus Connector
Port Replicator
2